Obi_wan_69
Junior Member
- Joined
- Aug 6, 2015
- Posts
- 16
- Reaction score
- 1
- Ram Year
- 2003
- Engine
- 4.7 v8
So basically what im looking to do is install an Ipad or a Samsung galaxy tab into my dash, Id like to find a dash kit that would fit it directly however I doubt I will so my question is how do i go about cutting the dash to fit the tablet? I got a Dodge Ram 1500, 2003. This wouldn't be a problem but just because of how the plastic is shaped I see myself running into some problems so I thought id come here and ask for some suggestions perhaps some of you have already done this before. I will post pictures of what the dash looks right now and how I want it to look when im done.
http://i.imgur.com/oe3HUvX.jpg
http://i.imgur.com/hyviWZR.jpg
WE ARE DONE WITH THE PROJECT!! HERE IS THE OUTCOME, THE CARDBOARD WAS USED AS A FRAME/MOLDING. Good luck to whoever attempts to do the same, spent about 5 hours in total on this, couldnt get a picture with the tablet in the dash itself due to my phone is broken all the pictures were taken with the tab.
AND THE FINAL PRODUCT, DIDNT TURN OUT AS GOOD AS I WOULD HAVE HOPED BUT HAD NO PREVIOUS EXPERIENCE IN DOING THIS.
http://i.imgur.com/oe3HUvX.jpg
http://i.imgur.com/hyviWZR.jpg
WE ARE DONE WITH THE PROJECT!! HERE IS THE OUTCOME, THE CARDBOARD WAS USED AS A FRAME/MOLDING. Good luck to whoever attempts to do the same, spent about 5 hours in total on this, couldnt get a picture with the tablet in the dash itself due to my phone is broken all the pictures were taken with the tab.
AND THE FINAL PRODUCT, DIDNT TURN OUT AS GOOD AS I WOULD HAVE HOPED BUT HAD NO PREVIOUS EXPERIENCE IN DOING THIS.