corneileous
Senior Member
- Joined
- Sep 6, 2016
- Posts
- 6,852
- Reaction score
- 3,918
- Location
- Podunkyville, OK
- Ram Year
- 2018 Ram 1500 Limited 4X4
- Engine
- Hemi 5.7
I'm sure this has probably been asked before and being that I'm really not interested in HID's due to all the ballasts and stuff like that you have to run outside the housings, what is a good LED bulb for the factory 4th Gen projectors that will work as good or almost as good as HID's being that Ive read it quite a bit that HID's are the way to go? Another reason why I'm not interested in HID's is because of the warm up time they require. I wasn't crazy about that the last time I had HID's.
I found these as possibilities from AuxBeam which are either the F16 Plus-9005 or the X60-9005 and I found these also from AuxBeam but at 25,000 lumen that seems a little bright. Thoughts? I guess those 25,000 lumen ones would be good for high beams in the open reflectors but being that my auto high beam sensor is pretty sensitive, those might even be a little too bright for that as well being that the last LED high beams I had would cause the brights to constantly go on and off from the reflections from pretty much any roadside sign or any type of delineator post.
Thanks in advance.
I found these as possibilities from AuxBeam which are either the F16 Plus-9005 or the X60-9005 and I found these also from AuxBeam but at 25,000 lumen that seems a little bright. Thoughts? I guess those 25,000 lumen ones would be good for high beams in the open reflectors but being that my auto high beam sensor is pretty sensitive, those might even be a little too bright for that as well being that the last LED high beams I had would cause the brights to constantly go on and off from the reflections from pretty much any roadside sign or any type of delineator post.
Thanks in advance.
Last edited: