Need Header Help

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

HillbillyStyle

Junior Member
Joined
Jul 25, 2019
Posts
6
Reaction score
2
Location
WV
Ram Year
2016
Engine
5.7 Hemi
I have a 2016 RAM 2500 4x4 with the 5.7
I need to replace these junk exhaust manifolds but I'm trying to find a set of headers that will bolt right up where the stock manifolds do now. I don't want to do any modifications just a simple swap. Are there any 2500 owners here that can tell me what they used so i can order the right header for the simple swap? Thanks for the help.
 

Pull Ya

U.S. MARINE VETERAN
Supporting Member
Military
Joined
Jan 16, 2012
Posts
15,788
Reaction score
23,069
Location
Cedar Creek, Tx
Ram Year
2015
Engine
5.7 Hemi
Check with Matt at Moe's Performance, a preferred vendor on this forum. He will be able to tell you which headers will be a the best fit.
Jay
 

Selcher

Senior Member
Joined
Dec 14, 2013
Posts
707
Reaction score
327
Location
Canada
Ram Year
2022
Engine
Hemi 5.7 eTorque
Check with Matt at Moe's Performance, a preferred vendor on this forum. He will be able to tell you which headers will be a the best fit.
Jay

Agreed... if you can get a response! lol
 
OP
OP
H

HillbillyStyle

Junior Member
Joined
Jul 25, 2019
Posts
6
Reaction score
2
Location
WV
Ram Year
2016
Engine
5.7 Hemi
Bought a set of JBA Shortys from jegs that says they're for my 2500 but the passenger side hits the frame. Would need to remove about 3/4 of an inch from the one pipe just to get the header installed. Pretty upset at the moment. Mechanic is having to put my old manifolds back on and I'm stuck with several days of labor cost without accomplishing anything to prevent the bolts from breaking again.

Sent from my SM-G955U1 using Tapatalk
 

crackerjack1957

Senior Member
Joined
Sep 26, 2015
Posts
2,052
Reaction score
2,460
Ram Year
2014 Sport 1500 CC 4x4
Engine
Hemi 5.7...65RFE...4.56
If it didn't have these numbers 1961S-***
It's not for the 2500
Matt would have sent the correct ones.
 

crackerjack1957

Senior Member
Joined
Sep 26, 2015
Posts
2,052
Reaction score
2,460
Ram Year
2014 Sport 1500 CC 4x4
Engine
Hemi 5.7...65RFE...4.56
Bought a set of JBA Shortys from jegs that says they're for my 2500 but the passenger side hits the frame. Would need to remove about 3/4 of an inch from the one pipe just to get the header installed. Pretty upset at the moment. Mechanic is having to put my old manifolds back on and I'm stuck with several days of labor cost without accomplishing anything to prevent the bolts from breaking again.

Sent from my SM-G955U1 using Tapatalk
Someone else had this issue on a 2500
https://www.ramforum.com/posts/1810997/
 
Top