Passenger Airbag issue 2010 Quad Cab SLT

[MudDog2007]

Got Code B00102B Passenger frontal squib 1 control wires short together.

I have the service manual for the 2009, close enough. The control module is under the Center Console as I have Bucket seats.

I pulled both of the glove boxes out and did as much searching as I could. Its Odd , My 2010 Laramie has as Key switch to turn off the passenger bag , but this SLT does not.

You have to basically take the entire dash apart to get the bag out , but Im not sure thats the issue. I will pull the console and try to back trace from there. Any thoughts ?

 

[MudDog2007]

Interesting info popped up. Evidently if the control module experienced some sort of anomaly, i.e. crash, electrical fault ect, the module can store the event and trip the airbag light. Info says the module needs to be reset. However it takes a special setup to do that.

Any thoughts ?