Marciel
Senior Member
- Joined
- Feb 4, 2017
- Posts
- 206
- Reaction score
- 63
- Ram Year
- 2006
- Engine
- 5.7 hemi
My advice is not to cheap out on the lift and spend the extra money on coilovers and upper contol arms because the half ton ram ones are junk.
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Yea mines 6" front and 4" rear. Not sure why it's only 5" for yours.
6 in front 4 block in the back rough country with 35s 12.50x20s
6 in front 4 block in the back rough country with 35s 12.50x20s
Nice looking truck. Where in Michigan are your from? I'm from the UP.
Looks good! Looks like it sits higher than mine and I have the same lift lol. Got a rear pic of your roll pan? I was considering putting one on.
My wheels are 18x9.
That looks real good! The hitch is a concern for me that's why I wanted to see yours hoping you still had yours on there so I could see how it looked together. I don't wanna take mine off cause I use it pretty frequently.
I'll be remounting mine I'm just gonna trim the roll pan to fit it
Sent from my iPhone using Tapatalk
Yea I'll have to ponder that idea some more.
When I was looking for a pan for my dakota they had kits that hinged the licence plate down to a accept a hitch. I'm sure they have similar set ups for Rams.
Sent from my SM-N910V using Tapatalk
I've debating recessing mine father back on the frame as well
Sent from my iPhone using Tapatalk