Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
I don't have a rack back there, but for my audio equipment I bonded a piece of composite board to the back wall to mount to. Should be able to do the same, but screw rifle mount brackets to it instead.
Holy mother of AMPs!!!! Thanks for the info. I may you with your idea a bit. If like to be able to store a shorty rifle, a vest with mags, and probably my trusty axe back there.I put down dynamat first, which is a butyl based sound deadener and very sticky and then epoxy on the board to the dynamat so I could get it off, but not easily. I don't have pictures of mine, but this shows you how much can be fit back there.https://www.ramforum.com/threads/new-amps-and-a-really-full-back-wall.120934/
Don't think both would fit in the cases. The bracket between the 60/40 is fairly tight to the wall and the seat has to be able to go up against the wall a little to fold them up. With some layout they might both fit without the cases because you could set them down lower and have the barrels just above the brackets.That is pretty cool indeed... but why I was asking about rear space is cuz of my 2 ARs and when I go to and from the hunting cabin...
Will these 50" L x 3 1/2" thick AR gun boxes fit back there?? stacked of course... (all i would need mounted to the back wall is straps to hold them there)
View attachment 190193
View attachment 190194
Whole setup with the straps was like $8.^^^ That is awesome...
I know this is an old thread but this is what I did. Two Velcro straps from Walmart and they work great. View attachment 520636