OnSale
5th Gen Crew
- Joined
- Nov 12, 2016
- Posts
- 3,218
- Reaction score
- 1,723
- Location
- Philadelphia, Pa
- Ram Year
- 2020
- Engine
- Hemi 5.7L
Starting my 3rd personal Retrofit for my 2012 Ram 1500. I've done a bunch of Retrofits for other people, but this will be my 3rd build for myself and my truck.
• Delivery #1: DNA Motoring Black Quads w/ Clear Corners
• Delivery #2: The Retrofit Source
• Delivery #3: The Retrofit Source & Opt-7
** Retrofit Build List **
≡ Low Beam Retrofit
= Morimoto M-LED Bi-LED 3" Projectors
= Morimoto G37-R Shrouds
= Profile Prism 80mm RGBW Halos
= Profile Prism 110mm RGBW Halos
= Profile Prism RGBW Demon Eyes
= Morimoto XB-T Bluetooth RGBW Controller
= Morimoto D2S 4.0 Demon Eye Mounting Brackets
= TRS H11 Male -> 9006 Female Adapter
= TRS 9005 Male -> 9005/9006 Female High Beam Splitters
≡ High Beam Retrofit
= Profile Hi-Lens Bi-LED Multi-Lens High Beam Projector
= Morimoto G37-R Shrouds
= TRS 9005 Male -> 9005/9006 Female High Beam Splitters
≡ Other Stuff
= Morimoto 9006 Stand-Alone Canbus Adapters
= Morimoto Black Retrorubber
= 3157 Switchback Bulbs w/ Diode Dynamics Resistors
= Opt-7 FluxBeam X LEDs for Foglights
So there's the build list and pics of the parts I've received already. I'm waiting on 2 more shipments. One is replacement G37-R shrouds because the first set had a ton of imperfections but TRS was super quick and awesome and already sent me a 2nd set. The other shipment I'm waiting on is the Profile Hi-Lens projectors, Morimoto Stand Alone Canbus Adapters and another pair of G37-R shrouds for the Hi-Lens projectors. Then I'll be ready to start my build.
I will be leaving the housing all black, but I will be painting all 4 G37-R shrouds black and red like the picture below.
This time I will 100% be documenting the ENTIRE build process with TONS of pictures for each and every step. From where each plug goes, to how I mount the projectors, to where I mount everything else.
Be sure to check back for updates. All the parts should be here by the middle of next week. So I expect to start the build next weekend. I'll post a few pictures here and there as the build is on going, and once I'm done I will post all of the build pictures. I'll be setting up my DSLR camera on a tri-pod and doing a time lapse as well.
Any questions, comments, suggestions or anything else is welcome. I'm always open to suggestions as someone else's ideas or opinions could open up a different approach I don't see that could better my build.
Sent from my PH-1 using Tapatalk
• Delivery #1: DNA Motoring Black Quads w/ Clear Corners
• Delivery #2: The Retrofit Source
• Delivery #3: The Retrofit Source & Opt-7
** Retrofit Build List **
≡ Low Beam Retrofit
= Morimoto M-LED Bi-LED 3" Projectors
= Morimoto G37-R Shrouds
= Profile Prism 80mm RGBW Halos
= Profile Prism 110mm RGBW Halos
= Profile Prism RGBW Demon Eyes
= Morimoto XB-T Bluetooth RGBW Controller
= Morimoto D2S 4.0 Demon Eye Mounting Brackets
= TRS H11 Male -> 9006 Female Adapter
= TRS 9005 Male -> 9005/9006 Female High Beam Splitters
≡ High Beam Retrofit
= Profile Hi-Lens Bi-LED Multi-Lens High Beam Projector
= Morimoto G37-R Shrouds
= TRS 9005 Male -> 9005/9006 Female High Beam Splitters
≡ Other Stuff
= Morimoto 9006 Stand-Alone Canbus Adapters
= Morimoto Black Retrorubber
= 3157 Switchback Bulbs w/ Diode Dynamics Resistors
= Opt-7 FluxBeam X LEDs for Foglights
So there's the build list and pics of the parts I've received already. I'm waiting on 2 more shipments. One is replacement G37-R shrouds because the first set had a ton of imperfections but TRS was super quick and awesome and already sent me a 2nd set. The other shipment I'm waiting on is the Profile Hi-Lens projectors, Morimoto Stand Alone Canbus Adapters and another pair of G37-R shrouds for the Hi-Lens projectors. Then I'll be ready to start my build.
I will be leaving the housing all black, but I will be painting all 4 G37-R shrouds black and red like the picture below.
This time I will 100% be documenting the ENTIRE build process with TONS of pictures for each and every step. From where each plug goes, to how I mount the projectors, to where I mount everything else.
Be sure to check back for updates. All the parts should be here by the middle of next week. So I expect to start the build next weekend. I'll post a few pictures here and there as the build is on going, and once I'm done I will post all of the build pictures. I'll be setting up my DSLR camera on a tri-pod and doing a time lapse as well.
Any questions, comments, suggestions or anything else is welcome. I'm always open to suggestions as someone else's ideas or opinions could open up a different approach I don't see that could better my build.
Sent from my PH-1 using Tapatalk