show your truck

[BlkRamRt]

where's a couple good places to get a 2/4 drop and which one is better ? Do they come with the pan hard bar now?

most if not all kits come with the track bar relocator.

 

[delunad]

Low pressure light has been on with the rims but got my censers in today and got them put on

 

[Lhemi]

most if not all kits come with the track bar relocator.

The kits I've looked at don't say anything about that, and from what I've read on here everyone says you need a Pan Hard bar to relocate your rear axle or to center it back up.

 

[nwram]

1st snow of 2013



[/ATTACH]

 

[Myram1500]

belltech 2/4 drop turned to a 3/5.5 and air lift helper bags. Still going to lower front another 1/2 inch and back 1 inch. swapped my 17" stock wheels for some oem 20's with some 275/55r20 tires.

 

[Yamifz1]

I have just recently picked up my sport and have not done a whole lot of mods yet but here it is.


My favorite mod so far is the Vararam.

 

[Silverbullet]

Silverbullet, where in Texas are you?

Fort worth

 

[Silvercreek]

It looks like we chose the same color. How do you like your truck so far? Do you have the back lowered? What did you use to lower it?

 

[Silvercreek]

Past by you on base the other day. Good looking truck!

Sent from my EVO using Tapatalk

That's a beautiful truck. The only thing you're missing are some 5" exhaust tips.

 

[Yamifz1]

It hasn't been long since my last post here, as a matter of a fact it's on the same page, but my truck has undergone a fair bit of modding since then.
So here is what it looks like now with the rally stripes and tinted tail lights and 3rd brake light.

 

[parkersdad]

I posted it in three threads now but here is my plain tradesmen with a few options 2500 Hemi

 

[delunad]

Just got done debadging my truck

 

[Silverbullet]

Installed turn signal mirrors today. Still need to wire them up but what a difference!

 

[delunad]

Installed turn signal mirrors today. Still need to wire them up but what a difference!

Was the wiring there or you're going to run the wire?

 

[Silverbullet]

Was the wiring there or you're going to run the wire?

I only swapped the cap and light but I have the harness from the signal mirrors the parts came from. My express mirrors did not have the plug for the light so I'm going to swap the mirror harnesses and see if the dealership can change the sales code and get them to work with out hard wiring them. But as of right now they are not hooked up. I did this the cheaper way instead of buying the expensive oem mirrors or cheap aftermarket ones I got used oem ones off of eBay that had broken glass and got the caps painted. So I have oem harnesses to swap in. I'll start a thread when I get it all figured out.

 

[delunad]

I only swapped the cap and light but I have the harness from the signal mirrors the parts came from. My express mirrors did not have the plug for the light so I'm going to swap the mirror harnesses and see if the dealership can change the sales code and get them to work with out hard wiring them. But as of right now they are not hooked up. I did this the cheaper way instead of buying the expensive oem mirrors or cheap aftermarket ones I got used oem ones off of eBay that had broken glass and got the caps painted. So I have oem harnesses to swap in. I'll start a thread when I get it all figured out.

Ohh ok thanks I want to do the same to mine soon to will keep an eye out for the thread

 

[BlkXpress]

 

[Jabalone]

What's your drop Blk? Looks good.

 

[Turblown03]

Hey Delunad, nice truck! I though for a second I forgot that I posted in this thread. Haha, here's mine.

McGy's 4" rear and a custom Bilstein 2" front drop with 22" KMC Slides.

 

[BlkXpress]

=

What's your drop Blk? Looks good.

Thanks! Belltech 2/4 with the stock tires still on it. They fill the gap nicely with no rubbing issues and don't bottom out, so I'm holding off on new tires for the time being.