_simm_ns
Member
Anyone know how or if it's possible to unholy the light assembly from mirror housing???,
Sent from my SM-G955U using Tapatalk
Sent from my SM-G955U using Tapatalk
Side mirror light removal
- Thread starter _simm_ns
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
CFRam1500
Junior Member
- Joined
- Dec 4, 2017
- Posts
- 13
- Reaction score
- 2
- Location
- Jacksonville, FL
- Ram Year
- 2011
- Engine
- Hemi 5.7
OP
OP
_simm_ns
Member
Hahaha damnit. Unmount** trying to take the fixture out of the mirror housing.
Sent from my SM-G955U using Tapatalk
Sent from my SM-G955U using Tapatalk
firebuff17
Senior Member
Which mirror do you have?
Tow? Standard? Sport?
Tow? Standard? Sport?
OP
OP
_simm_ns
Member
stimpy433
Senior Member
I found this if you are talking about the puddle lights... hope it helps!!!
Start by operating the mirror to the fully down position.
- Grasp the top edge of the mirror, and pull it further then the adjuster did...this will release the top clips.
- Look down inside to see the lower hinge style clips...separate them and remove the mirror glass.
- Disconnect the heated mirror wires (if applicable)
- Locate and remove the 3 screws that hold on the mirror cover.
- Remove cover
- Locate latch tab for LED lighting unit and release
- Gently pry the LED unit from the housing.
- This might take some persistence, and the weather seal sometimes hangs on to the unit and resists it's removal.
Start by operating the mirror to the fully down position.
- Grasp the top edge of the mirror, and pull it further then the adjuster did...this will release the top clips.
- Look down inside to see the lower hinge style clips...separate them and remove the mirror glass.
- Disconnect the heated mirror wires (if applicable)
- Locate and remove the 3 screws that hold on the mirror cover.
- Remove cover
- Locate latch tab for LED lighting unit and release
- Gently pry the LED unit from the housing.
- This might take some persistence, and the weather seal sometimes hangs on to the unit and resists it's removal.
OP
OP
