tones2SS
Senior Member
Nice looking truck!
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Thanks man!!!!!Looks good man!
I'm aware but the GF is a progressive coil that I can still moderately haul with too...
Pics?I'll be adding the bilstien adjustable's up front in the spring (almost winter here) and using a lathe to machine a groove 1.25" lower than the "stock" height groove on them to bring me down another 1.25" and maintain ride quality. Since my GF 2" fronts should be settled now, it should be an inch for an inch now. I'm running a 4" drop in the rear with Belltech's and Airlift 1000's for towing. Nice and low most of the time, and support when I haul (rarely).
3/4 ton trucks may require air ride kits, quick search did not give me much!Looked through some of the pages, but not all 61. I take it no one dropping 3/4 tons? Been looking for drop kits but not finding anything.
Pics?
Sent from my SM-G950U using Tapatalk
3/4 ton trucks may require air ride kits, quick search did not give me much!
Sent from my SM-N920P using Tapatalk
Def keep me posted I too want the front a bit lower. GF front also.Shown here with my current 2F and 4R drop (GF front coils with Belltech rears)
I'll be sure to put up pictures in the spring when I do the front end lower and let some air out of the rear. Should be level, although I may need a small bolt in notch to prevent bottoming out. That 4" rear without the airlift's was rough.
Hi all, had some crazy stuff happen and finally had the time to list the GF drop I was running in the FS section.
Here is the thread for anyone interested on a GF drop with extra's
http://www.ramforum.com/f21/ground_force_2_3_qc_cc_4wd_drop_bolt_extras_-_ny-111084/
Hi all, I have a 2015 Ram 4x4 and i'm looking for just a simple way to lower the rear 1 1/2 or 2". Any help will be greatly appreciated.
Thanks
Hookie