Supreme spacers 1.5”

[Frank Flores]

Thank you so much Bryan28! I think they look great.

 

[OnSale]

Can you post some pics of what the wheels/truck looked like before you put the spacers on?


Sent from my iPhone using Tapatalk

 

[bryan28]

Dang Bro! Now I'm sorry I never used them on my 17. That truck looks bad a$$!

 

[Frank Flores]

Thanks, Bryan!

 

[Frank Flores]

Will do OnSale!

 

[Frank Flores]

Here’s the truck stock

 

[bryan28]

Doesn't even look like the same truck. I normally don't like the pocket flares but yours work perfectly with your set up

 

[OnSale]

Here’s the truck stock

View attachment 220750

You don’t have any pics of those wheels + tires without the spacers? I am curious how much of that is the wheels offset versus the spacers.


Sent from my iPhone using Tapatalk

 

[Frank Flores]

Thanks again Bryan! I love they way the way it sits now!

 

[Frank Flores]

OnSale, I’m trying to find one, but I can’t seem to find it. I think you’re absolutely right, though. I have a -44 offset so the 1.5” is more noticeable for sure

 

[bfill_rebel]

When installing do people use or recommend using Loctite (blue 243) on the lugs that attach spacer to truck?


Sent from my iPhone using Tapatalk

 

[Evguy1]

YES! and be sure its a quality spacer. The cheap ones have cheap studs that will stretch or break.

 

[bfill_rebel]

YES! and be sure its a quality spacer. The cheap ones have cheap studs that will stretch or break.View attachment 220808

Thanks. Yea I got same as OP. Supreme suspension 1.5” hub centric spacers


Sent from my iPhone using Tapatalk

 

[umbighouse]

I saw a video from someone who mentioned if you use 1.5" spacers, you may need to trim the original studs because they'll stick out too far through the spacer holes. Thoughts?

(I like the look of 1.5", but I'd go with 2" spacers if it means I don't need to touch the original studs)

 

[Evguy1]

If you are using stock wheels have a look at the back of the wheel. On the two trucks I put spacers on the stock wheels had pockets next to the stud holes which allowed the excess stud to sit without cutting. Wish I had a picture. I ran 1.5" spacers on both trucks with stock wheels and no cutting of studs.

 

[bfill_rebel]

I saw a video from someone who mentioned if you use 1.5" spacers, you may need to trim the original studs because they'll stick out too far through the spacer holes. Thoughts?

(I like the look of 1.5", but I'd go with 2" spacers if it means I don't need to touch the original studs)

Spacer fit on my stock Rebel rims without cutting studs.


Sent from my iPhone using Tapatalk