Sway bars and links

[Hemi395]

Definitely interested in this as well[emoji106]

 

[Vanterpool224]

So, I did get confirmation that the 2500 rear sway bar does bolt right in. The guy that did it has a 2wd RT so I don’t know about the end links for sure but he did say it was a direct bolt on.

As for the front sway bar and links I have no idea yet but I’m working on that as well.

I am curious about this. What year(s) 2500 rear sway bar works with the 4th gen 1500's? If the stock is that much beefier and closer to hellwig status then might as well go RockAuto... unless I am missing something. None-the-less this is also something I am looking at, as its my next project.

 

[Vanterpool224]

@Hemi395 I did see on RockAuto and Mopar sites that the 2014 2500 rear sway bar may be the topic of this discussion. If we can get confirmation, I may pull the trigger on that as a cheaper alternative to the Hellwig.

 

[Hemi395]

@Hemi395 I did see on RockAuto and Mopar sites that the 2014 2500 rear sway bar may be the topic of this discussion. If we can get confirmation, I may pull the trigger on that as a cheaper alternative to the Hellwig.

Awesome, definitely let us know[emoji106][emoji106]

 

[Elevated 2013]

I am curious about this. What year(s) 2500 rear sway bar works with the 4th gen 1500's? If the stock is that much beefier and closer to hellwig status then might as well go RockAuto... unless I am missing something. None-the-less this is also something I am looking at, as its my next project.

I believe it was the same years as the 1500s. I believe he had a 2012 2500. But I believe it has to be a 2wd model. I don’t remember exactly what his setup was to be honest as it was a while ago that I talked to him.

 

[Vanterpool224]

I believe it was the same years as the 1500s. I believe he had a 2012 2500. But I believe it has to be a 2wd model. I don’t remember exactly what his setup was to be honest as it was a while ago that I talked to him.

Ok. I didnt mean to ressurect an old thread but it is very intruiging. I emailed a few mopar reps. Yeah no luck there as they claim its customization. ‍ I think a few trips to a pick-an-pull might be in order for a little experiment.

 

[Vanterpool224]

So after some digging, the 2013 and older 2500 4x4 rear sway bars don't fit. Their endlink orientation is verticle. The 2014 thru 2018 4x4 however is horizontal and extremely similar to the 1500.

https://parts.moparonlineparts.com/...-engine/rear-suspension-cat/ride-control-scat

 

[PdPuNOme]

anyone actually try this yet? I have a line on a 2500 hellwig have been debating to try it or not, but now knowing I am not alone I just may do it.

 

[ram1500rsm]

If you don't try you may never know. Worst case scenario you can return the part or sell it.