CopperBeauty
Senior Member
- Joined
- Jan 18, 2014
- Posts
- 129
- Reaction score
- 39
- Location
- Greenwood, AR
- Ram Year
- 2006 Mega Cab
- Engine
- 5.9 Cummins
I'm currently installing a rcx 6" lift. I've got pretty much everything back on the drivers side. I'm to the point where I need to raise the lower control arm to connect the knuckle to the upper ball joint. I've installed the bilstein 5100s set at 2.1. But the problem is I can't seem to get the lower control arm to move upward. Its acting like it's stuck. I need help!! Here's some pics
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk