94DODGER BLU
Junior Member
Installed new A/C compressor. Also changed tail seal in the tranny. So now it’s time to ride.
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Front hub conversion arrived yesterday. I'll install it this weekend
Yesterday I fixed a coolant leak that turned out that the factory hose clamp, pinch type, lost it's muster and had to be replaced with a screw type hose clamp.
if you get a compressor on amazon, itll be about $120-$150, recommend just replacing all components, less troiubles and diagnostic that way unless you've already replaced some parts.
The only thing still original on my cummins wrecker is the low side line. The orificice tube an d compressor were my main problems.
Yup, I'm going to pickup a set of o-rings for the truck since I need then for the compressor hook-up. Might as well do all of them at once.I meant replace everything, at the very least make sure to change the o rings on the existing parts. I read about replacing the orifice tube, but the high side line for cummins was $40, so it was well worth it! (This was of course after I replaced all the other parts!)