What did you do with your 4th Gen this week?

[Jbyron]

Added 1/4” spacers so now I’m effectively 20x9 -6 on stock tires. Again this is on the Maxtrac 2.5” level with Fox shocks. Next up, alignment!

 

[Pull Ya]

... Lots of girls do.... wait, wait, what?

A 10 at 2 and a 2 at 10!!!! Welcome to Texas!
Jay

 

[Socalramfan]

Added a set of these.

Don't need to worry too much about mud, snow and rain here, but definitely got tired of vacuuming dog hair from the OEM mats. Lets see if this helps in that department. Happy with the fit so far

 

[Lyle Longboat]

... Lots of girls do.... wait, wait, what?

Damn brother!

 

[Lyle Longboat]

Didn’t do a anything as she’s been gone for over a week!
However she’s coming home Thursday afternoon! We going to have fun!

 

[mighty noid]

Well I went from flat black vinyl on the hood to a gloss back that is laminated as well. Better for not having it stained and getting water spots quickly....

Before:


After:

 

[NorZeman]

Added my "customized" JGR rotorary shifter that showed up 3 months after shipping confirmation.

I'm digging the look, matches the covers of the other dials better than it looks in the pictures.

Sent from my SM-G975U using Tapatalk

 

[DsrtRat08]

Fresh oil and filter. Also a fresh cabin air filter and drop in K&N.. the old filters have seen better days.

 

[joelmic]

Added my "customized" JGR rotorary shifter that showed up 3 months after shipping confirmation.

I'm digging the look, matches the covers of the other dials better than it looks in the pictures.

Sent from my SM-G975U using Tapatalk

My truck has those 3 small dials... are those 2 small ones the same size as the small dials I have? That would mean I'd have to buy 2 sets of what you did to get all 3 dials covered?

Anyone know?

 

[NorZeman]

My truck has those 3 small dials... are those 2 small ones the same size as the small dials I have? That would mean I'd have to buy 2 sets of what you did to get all 3 dials covered?

Anyone know?

@joelmic, the two radio dials are slightly smaller than the fan speed dial on your setup, correct?

The three dials on the right are just covers that slip over the stock knobs. I used ones marketed for challengers. https://www.amazon.com/dp/B07V2G8VBK/ref=cm_sw_r_cp_apa_i_kbBbFbFE1BBAA not a perfect fit, but haven't had any issues so far.

Sent from my SM-G975U using Tapatalk

 

[joelmic]

@joelmic, the two radio dials are slightly smaller than the fan speed dial on your setup, correct?

The three dials on the right are just covers that slip over the stock knobs. I used ones marketed for challengers. https://www.amazon.com/dp/B07V2G8VBK/ref=cm_sw_r_cp_apa_i_kbBbFbFE1BBAA not a perfect fit, but haven't had any issues so far.

Sent from my SM-G975U using Tapatalk

No my setup is all 3 dials are the same...

So I was just wondering if those 2 small ones fit these dials

or does anyone know what fits these dials??? I thought I saw it in here somewhere.... maybe it was in MODS under $100

 

[Dragonfire82877]

Finally installed a new bumper to get away from the one the previous owner screwed up.

Before:



After:



Up next, a leveling kit.

 

[Bowzer]

Added a set of these.

Don't need to worry too much about mud, snow and rain here, but definitely got tired of vacuuming dog hair from the OEM mats. Lets see if this helps in that department. Happy with the fit so far

View attachment 214540

My Husky floor liners have held up great the first year. The "Husky" labels came off but the mats are holding up great. Pull'em and rinse them off versus too much of the vacuum work. Faster and more effective.

 

[4eyedconekiller]

Roomie is test driving a ‘19 EcoD. Already challenged him to a drag race tonight when o get off work. He wanted to buy my truck? But got caught by his dealer buddy with this newer rig. Hasn’t pulled the trigger yet, but after I whoop on that stock truck, and he gets to see how much more comfy mine is, we will see what he says [emoji41][emoji41][emoji41]

 

[nowukno]

1.5 supreme wheel spacers and new cooper at3 4s tires...

 

[grumpygirl]

Mounted B5100’s on the rear. B6112’s get mounted Saturday.

 

[NJ_TN Ram]

Hey @big daddys house, replaced the chrome side badges with black ones. Had a half can of plasti dip laying around so I sprayed the grille and tailgate emblems. She was kinda dirty so I gave her a good sponge bath too!

 

[shadowhawk]

Hey @big daddys house, replaced the chrome side badges with black ones. Had a half can of plasti dip laying around so I sprayed the grille and tailgate emblems. She was kinda dirty so I gave her a good sponge bath too!

View attachment 214736

View attachment 214737

View attachment 214738

View attachment 214739

View attachment 214740

I just took all of mine off

 

[big daddys house]

Hey @big daddys house, replaced the chrome side badges with black ones. Had a half can of plasti dip laying around so I sprayed the grille and tailgate emblems. She was kinda dirty so I gave her a good sponge bath too!

View attachment 214736

View attachment 214737

View attachment 214738

View attachment 214739

View attachment 214740

Looks sexy brother!

Sent from my Pixel 4 using Tapatalk

 

[ram1500rsm]

Removed my fog pods and replaced them with Ridig spot pods.
Low beams
2020-07-08_10-07-52 by RAM RSM, on Flickr

Low beams + Rigid D series pods
2020-07-08_10-08-00 by RAM RSM, on Flickr