What did you do with your 4th Gen this week?

[revitupmoto33]

Got the new oil cooler in, wanted a oem one but seeing how they are nationally back ordered with no delivery date I went with the good ole Amazon special. Wasn’t too bad getting upper and lower intake manifold off, just lots of harnesses to unplug and plastic clips to unsnap. The new cooler assembly had some of the finest chinesium hardware that couldn’t handle the 9ftlb torque spec, so had to take everything back out and used the hardware from oem. Decided to do plugs since everything was apart and atleast that went quick and easy. Everything reassembled now just waiting for dealer to open in the am to pick up some coolant then test and see if the new unit holds up.

 

[dale197338]

Installed 2inch lowering springs in the rear with the airlift 1000 bags. Picture is crappy but on to next project samsung washing machine fun,,fun.

Sent from my SM-G781V using Tapatalk

 

[revitupmoto33]

Installed 2inch lowering springs in the rear with the airlift 1000 bags. Picture is crappy but on to next project samsung washing machine fun,,fun.

Sent from my SM-G781V using Tapatalk

Just taking a wild guess but the Samsung won’t do the spin cycle and comes up with uneven load?

 

[dale197338]

Just taking a wild guess but the Samsung won’t do the spin cycle and comes up with uneven load?

Lol I wish. The y on the back of the drum was broken. Oh she'd spin alright sounded like a plane or copter was landing. Parts should be here Monday pretty easy job. The basket is the hardest part getting it out of the machine it's heavy.

Sent from my SM-G781V using Tapatalk

 

[xenowraith]

Just got this 2017 sport last week. So good to have a truck again. Flowmaster 40 series already put on it.

 

[Solid State]

Bought our first camper. Sunset trail 242BH.

 

[revitupmoto33]

Finally got around to installing the wheeler bump stops I’ve had in the garage for months. Cut the factory cans out and made new ones +1.5” (which is where my shocks bottom out) and welded them in.

 

[Throwin Plugs]

Bought a nice new jack and ordered JBA headers. Should be a nice long project.

 

[Octane]

Lol I wish. The y on the back of the drum was broken. Oh she'd spin alright sounded like a plane or copter was landing. Parts should be here Monday pretty easy job. The basket is the hardest part getting it out of the machine it's heavy.

Sent from my SM-G781V using Tapatalk

I had a top load machine that the inner basket bearing went bad.I used that machine till the neighbors could hear it. Lol And it's such a crappy repair I threw the machine in the dump

 

[NJMOPAR]

Just got this 2017 sport last week. So good to have a truck again. Flowmaster 40 series already put on it.

View attachment 243286

Congrats! Beautiful truck.

 

[co-pilot]

Just got this 2017 sport last week. So good to have a truck again. Flowmaster 40 series already put on it.

View attachment 243286

Congrats bro!!!!
That thing looks fast even parked!!!!

 

[G-Ride990]

Helping my buddy wire up some amps in his 2019 classic. Almost the setup as me, PAC, kicker cxa 4 channel amp, kxa sub amp. Plus a few pics of the billet seat spacers I made for him.

Long day in the 90 degree heat!



View attachment 243322

 

[Adamcr68]

So I searched the forum for a thread like this and didn't find anything. I figured it would be fun to have a thread that everyone can watch what everyone is doing each week.

This week I put on Steelcraft nerf bars, and right now I'm getting the permaplating put on the truck. This way it gets a real good bath.

Went to PA to see Quick-Shifter, releveled my truck by adjusting my coil overs, had thought about trying to do it myself-got some great advice & how to from RAM1500rsm- but in the end my lack of jacks & stands & confidence that I could do it properly made it a easy decision to go to his shop. Another great time & I can rest easy knowing that the job is done right!

 

[Ramm5.7]

Did a little cleanup after work

 

[Socalramfan]

Not a Ram, but added another sibling to the stable

 

[DILLIGAF]

Got to use the winch for something other then felling trees... lol.

 

[Treburkulosis]

It turned 138k and is still as strong as day one. I had to add another Lucky Fin sticker back to it, since when I sold it to my dad it was removed. My super hero with super powers literally helped me and approved!

 

[hog4oc]

Install two amber light on hood scoop

 

[MartyZ]

Moved 2 playsets in 1 day, realized the bed is the same height as the structure. Let my daughter use it once before i unloaded it.

 

[Addicted2fishing]

W T F ????...................LMAO!!!!

really????????????

But do they have this for the sport bumper? Lol. This is a joke right?


Sent from my iPhone using Tapatalk