Would a 4" front/2" rear lift sit level?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

ders808

Member
Joined
Apr 4, 2016
Posts
34
Reaction score
0
Ram Year
2010
Engine
Hemi 5.7
Question in title.

Also, how do I replace rear springs? I saw a video and all he did was pull the rear shock bolt and let the axle drop and pull the springs out then put everything back together. It seemed like it was jump-shotted, but I'm not convinced it could be that easy.

Thanks
 

CLOUDL1GHT

Senior Member
Joined
Mar 17, 2014
Posts
851
Reaction score
557
Location
Lone Star State
Ram Year
2021
Engine
Cummins HO
If you are just replacing the coils, then yes it is that easy.

Remove the bottom bolt for the shock and then have someone stand on the lugs and the coil will fall right out.
 
OP
OP
D

ders808

Member
Joined
Apr 4, 2016
Posts
34
Reaction score
0
Ram Year
2010
Engine
Hemi 5.7
If you are just replacing the coils, then yes it is that easy.

Remove the bottom bolt for the shock and then have someone stand on the lugs and the coil will fall right out.

Alright, that seems simple enough. But will it sit level it i put 2" Coils in the back and a 4" RCX lift in the front?
 

JB1

Senior Member
TOTM Winner
Joined
Nov 3, 2011
Posts
8,366
Reaction score
7,529
Location
Houston, Texas
Ram Year
2017
Engine
Hemi 5.7
measure the distance from center of wheel to center fender lip edge for all four tires to determine how much difference
 
Top