adrianp89
Senior Member
- Joined
- Sep 3, 2015
- Posts
- 3,176
- Reaction score
- 1,273
- Location
- Tampa Bay, FL
- Ram Year
- 2019
- Engine
- Hemi 5.7
A lot of the reasons mentioned above are why I am probably going to pay to have my box built.
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
I know other guys have done it, but I'm not comfortable running the power wire outside the cabin. That seems like a bad thing waiting to happen, even with well shielded 0 gauge. I plan on running it through the delete plate (hopefully tonight!) and either running it under the driver side kick plates if it will fit, or under the carpet. Pics coming soon!
A lot of the reasons mentioned above are why I am probably going to pay to have my box built.
Hmm... I think what may have happened here is due to how the box was supported when you removed it and continued work.
Best way to,fix that gap is with a mixture of duraglass and resin. It will work a lot better than wood glue.
So I just went to run the front driver side speaker wires to the door...ugh. There's about 3" of crap between me and the door grommet. Not even sure where I'm going to begin but, it's definitely going to take longer than I thought.