Zone 4" with Quicklift struts?

[Mossybloak]

I realize most run Bils @ 1.4 with the 4" lift. I already have the Quicklifts and really love how they ride. But, I still have my stock struts just in case. Anyone have experience running the zone lift with something other than Bils? Thanks.

 

[ram1500rsm]

I would think the difference will be that you'll go to 6" in the front with the Ranchos?, 4" with the factory struts.

 

[JB1]

^^This

It will fit fine but If you might want to get the optional 5" rear coils, especially since you have a heavy cover on the back.

 

[Mossybloak]

Thanks guys. So, are the Bils set at 1.4 essentially the same height as the stock coil?

 

[JB1]

Setting the Bill's at 1.4 is merely to eliminate any rake (rear fender height higher than front).