SKWURLZ
Member
I'm still not satisfied with the Top of the line components. If the parts above aren't good enough, then cheaper less expensive ones are downright dangerous.
There are other options, Billet Rod Ends, I could have went full Heims too.
After everything I have thrown at this truck, all the parts, adjustments, etc... The ONLY way to properly fix it on a lowered truck is to modify the link arm mounts on the axle so at ride height they are parallel to the frame. Its the only way to fix the instant center to be within correct operating angles.
There are other options, Billet Rod Ends, I could have went full Heims too.
After everything I have thrown at this truck, all the parts, adjustments, etc... The ONLY way to properly fix it on a lowered truck is to modify the link arm mounts on the axle so at ride height they are parallel to the frame. Its the only way to fix the instant center to be within correct operating angles.