TrackRevolution
Junior Member
- Joined
- May 9, 2019
- Posts
- 13
- Reaction score
- 19
- Location
- Lake County, IL
- Ram Year
- 2017
- Engine
- Hemi 5.7
SRT? Simply Sean's Ram Truck for now but that acronym will certainly change.
A little back story I purchased the truck in May of 19 as you see it in the first few pics.
Plain jane Express 5.7 4x4 with a few things done already. Alpine X009 head unit, single JL 10w3v3, Kicker Coaxials in the doors and dash, tint, tonneau cover and Air Lift 1000 bags.
Really like the truck but in order to love it I have to add my personal touches to it.
Might get kind of picture heavy but it could be far better/worse since I forget to take pics often.
State at time of purchase:
The near future:
19 Durango SRT heated and ventilated front seats and heated rears.
4 10" L7S', KSS6704 6.75" Separates in the doors and KSC35 3.5" Coaxials in the dash.
2 CXA360.4 amps (doors/dash), 2 CXA800.1 amps (subs).
Audio Control Epicenter and Stinger 10 farad hybrid capacitor
Ram front console and custom rear console/sealed enclosure/amp rack.
Quick draft of rear console/enclosure/amp rack.
And it begins
Swapping center stack bezel to console style and running speaker wire. Original head unit install used factory wiring.
In the zone or lost my mind not sure which.
Removed tracks from SRT seats to cut off the Durango attachment points so I have a flat surface to work with.
Using spot weld cutter to remove the rivets on Ram seats so I can use the attachment points on the SRT seats.
Out of time for now and it's my daily so in the front seats go.
To be continued...
A little back story I purchased the truck in May of 19 as you see it in the first few pics.
Plain jane Express 5.7 4x4 with a few things done already. Alpine X009 head unit, single JL 10w3v3, Kicker Coaxials in the doors and dash, tint, tonneau cover and Air Lift 1000 bags.
Really like the truck but in order to love it I have to add my personal touches to it.
Might get kind of picture heavy but it could be far better/worse since I forget to take pics often.
State at time of purchase:
The near future:
19 Durango SRT heated and ventilated front seats and heated rears.
4 10" L7S', KSS6704 6.75" Separates in the doors and KSC35 3.5" Coaxials in the dash.
2 CXA360.4 amps (doors/dash), 2 CXA800.1 amps (subs).
Audio Control Epicenter and Stinger 10 farad hybrid capacitor
Ram front console and custom rear console/sealed enclosure/amp rack.
Quick draft of rear console/enclosure/amp rack.
And it begins
Swapping center stack bezel to console style and running speaker wire. Original head unit install used factory wiring.
In the zone or lost my mind not sure which.
Removed tracks from SRT seats to cut off the Durango attachment points so I have a flat surface to work with.
Using spot weld cutter to remove the rivets on Ram seats so I can use the attachment points on the SRT seats.
Out of time for now and it's my daily so in the front seats go.
To be continued...