- Joined
- Nov 19, 2020
- Posts
- 1,050
- Reaction score
- 1,336
- Location
- Saskatoon SK. Canada
- Ram Year
- 2021
- Engine
- 5.7
To start with did research and seemed this was a cool mod..WRONG..Got the unit with an extra lid..painted it and prepared install and cut Rad cover. Also bought the recommended pre filter sock. So I am into this for about $600. OK then we put it together..I mean I watch a certified mechanic. The lid will not seat on the front stud..Call Moe's for help he just says he has done many it was attached on shipment you have to ensure the filter is seated..DUH..yea ..my mechanic figured that out ..DUH!..So the mechanic heats the foam to allow the front lid to seat..finally get maybe 1/4 thread to tie it down onto the filter the back end has over 5/8 of an inch of extra thread. So after much fiddling and adjusting and trying to align the seating is still way off. Then we decide to let things squish down without to much pressure on the lid at the hole opening as we do not want it to crack or break.OK flip the unit over on a soft bed with the 1/4 inch holing the front lid area. Then we see one of the studs holding a rubber 14 inch underbelly cover is missing its washer. In addition there is a large flap at the missing washer point and the corresponding point on the opposite side. Also the fron of this rubber underbelly is open to allow dust debris etc in under the VARARAM near the throttle body...Am I annoyed..YEP..what a piece of garbage. passed my comments onto Matt..I wonder what his customer service is like..he answered intial email..no more..tried 8 phone calls..nothing but a recording...So Buyer beware i guess