smoothee
Senior Member
- Joined
- Jun 6, 2012
- Posts
- 1,321
- Reaction score
- 684
- Location
- St. John's, NL
- Ram Year
- 2011
- Engine
- Hemi 5.7
Hey, just had a RC 4" lift installed, in order to pull off the 35x12.5R18's. I already had Bilstein's up front and was thinking they could be readjusted to stock height. Unfortunately this was not the case, to avoid rubbing. So right now the rear sits about 3/4" lower than the front. Wondering if there are any 1" spacers or something that would work with the RC lift. The place I had the lift installed hasn't had any luck finding a solution. Thanks in advance.