Only tools needed for this job. Flathead screwdriver and an 8mm socket with extension.
This is why I need a catch can. This truck only has 6k miles on it and look at all the oil/dirt on the bottom side of the stock tb.
Here is a good view of the stock tb, you can see it is dirty with a bunch more material inside.
Only tools needed for this job. Flathead screwdriver and an 8mm socket with extension.
Here is the new 87mm tb on the truck, compare this to the old one, looks way better.
Here is the old tb on the truck, notice how much more material there is in it.
Only tricky part to this install is the clips. You need to slide the red part back (to the right in the picture) and then squeeze the clip to pull it
View from the bottom of the new 87mm tb
dogcar3

Only tools needed for this job. Flathead screwdriver and an 8mm socket with extension.

  • Like
Reactions: Joe w.

Latest posts

Media information

Album
Moes 87mm TB install
Added by
dogcar3
Date added
View count
323
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Members online

Total: 12,247 (members: 37, guests: 12,210)
Robots: 1,431

Forum statistics

Threads
211,274
Posts
3,064,407
Members
171,555
Latest member
ROYSZZ4
Back
Top