Recent content by BlackGold6.4

  1. BlackGold6.4

    swap my 66RFE for a G56....cost?

    There is different gear options for the G56 ... I want the 6.29 first gear and the 6.29 reverse gear which the thinking with the 4.10 gears and 35" tires is going to work just fine but that will be a future topic to address
  2. BlackGold6.4

    swap my 66RFE for a G56....cost?

    Don't tow very much but sometimes we do, mostly working in the bush getting wood, clearing trails, recovering vehicles off winter roads, carrying heavy loads.. then there's hunting, fishing, hiking and the list goes on. The low n slow work the truck does is a tranny killer. In the past we had a...
  3. BlackGold6.4

    swap my 66RFE for a G56....cost?

    I think it mostly has to do me and the time involved also I need to let my builder do his thing resulting in a strong built combo and calm down.:driver:
  4. BlackGold6.4

    swap my 66RFE for a G56....cost?

    It will be a bit longer for that update, took a backslid in progress :sad72: but HP tuners has been verified ... just a few technical mechanical things we had miscommunication on that has been sorted just means more time added to completion.
  5. BlackGold6.4

    6.4L Cam Experiences / Testimonials

    That's awesome advice @Wild one , good thing to know about the oil pumps. Sounds right about getting on the phone as I do have all that information you mentioned, just not financial ready to make that call yet. So studying and reading what others do is it. It is on the list but tranny first.
  6. BlackGold6.4

    6.4L Cam Experiences / Testimonials

    I know this post is a bit old but want to chime in... I have been doing a lot of research on this topic and I'm still undecided on what cam to get... but when this happens I will change the lifters with MDS plugs and also the oil pump will be changed too. Flyin Ryan has a cam I'm interested in...
  7. BlackGold6.4

    swap my 66RFE for a G56....cost?

    I will have an update soon, just waiting for some more bits of information on the reprogramming of the ECU. The G56 is in place and the rework of the transfer case is being worked on.
  8. BlackGold6.4

    SNOW PICS

    We got dumped on and all roads were to much for cars, my wife's Honda Ridgeline with winter rated all seasons did very well. Can't say the same for that car in this pic...lol
  9. BlackGold6.4

    The 6.4 HD Hemi Thread

    Yes agree, Ordered mine with 4.10's and sure grip... a must for this set up.
  10. BlackGold6.4

    New truck prices are insane

    Right... WTF?
  11. BlackGold6.4

    swap my 66RFE for a G56....cost?

    No, the G56 is a G56 but bell housing and input shafts are different, also the parts between the engine block and tranny are different to a Cummins too. I got the parts list from Ram chassis cabs were the G56 was offered behind a 6.4... but that 6.4 in the chassis cab is not a MDS engine so the...
  12. BlackGold6.4

    swap my 66RFE for a G56....cost?

    That would be much appreciated the measurement of the driveshaft from White six four helps too. Which made me think that finding a drive shaft from a 3500 chassis cab might be an option but still means that the cross-member/transfer-case still need to reposition. The main thought behind an...
  13. BlackGold6.4

    SNOW PICS

    I think that is everywhere, we only have just under 2 ft off snow when normally we're over 4 ft.
  14. BlackGold6.4

    SNOW PICS

    -40 is the same in both .. but I'm in Celsius .. so today was -37 but with wind it felt like it was in the -40's
  15. BlackGold6.4

    SNOW PICS

    Snow making at -40 at Mystery Mountain Winter Park, the heated gloves my wife bought me are awesome.
See more

Latest posts

Staff online

Members online

... and 13 more.
Total: 1,316 (members: 63, guests: 1,253)
Robots: 1,679

Forum statistics

Threads
195,701
Posts
2,873,502
Members
156,582
Latest member
DaleTimms

Share this page

Top