Recent content by Galahad144

  1. G

    Beginning of HEMI tick or piston slap?

    Not saying it couldn’t be a combination of things, however there is a distinct metallic inconsistent tapping noise at idle that I haven’t posted here that I believe is related to the noise I have posted
  2. G

    Beginning of HEMI tick or piston slap?

    Now that is good info to know. I wonder if these microglass filters are cheaper than the K&N were paying $25CAD for these things
  3. G

    Beginning of HEMI tick or piston slap?

    Fair point. I will have a look to see what I can find!
  4. G

    Beginning of HEMI tick or piston slap?

    Interesting I didn’t know that. I thought they were that micro glass material. I could be wrong. Thank you we will definitely be in touch
  5. G

    Beginning of HEMI tick or piston slap?

    Explains why I haven’t seen it. I’m not in partsource often. I’ll have a look thank you!
  6. G

    Beginning of HEMI tick or piston slap?

    PUP is the most readily available oil I can grab. Not sure what’s in it now. Whatever the dealer put in. My cold starts are mostly quiet it’s only when the oil starts to thin out and engine gets up to temp that the truck starts getting noises
  7. G

    Beginning of HEMI tick or piston slap?

    Thank you Burla! I appreciate your input. This is very helpful. If I can get my hands on redline I’ll grab some. I’ll look up BITOG forums and see what’s there. Would an Hp-107 work from K&N? That seems to be the most readily available filter that’s around me. I see it not mentioned all that...
  8. G

    Beginning of HEMI tick or piston slap?

    This unfortunately is a warm start. I had shutoff the truck maybe an hour before this. I will definitely be using a better oil and filter than what’s on it on the next oil change. Redline is hard to get where I am so I will have to see what’s close.
  9. G

    Beginning of HEMI tick or piston slap?

    My phone stopped recording halfway through but there was another 30 or so seconds of that video
  10. G

    Beginning of HEMI tick or piston slap?

    I caught one of the main concerning noises much louder. This is after driving all day with a bit more idling than usual with some medium duty towing. This was 2 starts after I disconnected my trailer when I was about to head home. https://youtube.com/shorts/eMTH_np8ub0?feature=share
  11. G

    Beginning of HEMI tick or piston slap?

    It now makes a knocking noise but it’s not consistent. Seems to happen when truck is cold
  12. G

    Beginning of HEMI tick or piston slap?

    Link to the noise on YouTube. May need headphones to hear it. https://youtube.com/shorts/JSDJvKR6g-o?feature=share
  13. G

    Beginning of HEMI tick or piston slap?

    Has anyone used the Hp-1017 Gold K&N filter? I’m curious if it’s tan with redline if the high moly content will not allow the oil to flow through it as it’s a 10micron filter. I’ve always used them on past vehicles and the oil has been beautiful every 5,000km.
  14. G

    Beginning of HEMI tick or piston slap?

    It’s a very odd noise. If I can get a video uploaded obviously I could give everyone a better idea to what I’m referring to. When the noise starts the truck starts idling rougher. I thought it was intermittent but it seems to be consistent when the truck is fully warmed up and oil pressure is...
  15. G

    Beginning of HEMI tick or piston slap?

    Is the 5.7 have that bad of an oiling system that it needs the ultimate wear protection of redline despite the rest of the drawbacks compared to other oils? This is only one test however the test I viewed was that redline does not flow well in cold temperatures compared to something like PUP or...
See more

Latest posts

Members online

Total: 437 (members: 26, guests: 411)
Robots: 1,440

Forum statistics

Threads
195,625
Posts
2,872,668
Members
156,453
Latest member
Goodie1990

Share this page

Top