eBay - $9 and 24hrs later my new to me UAC was unlocked with the provided PIN. Would probably cost me that in gas if I went to the dealer lol (40" tires)
How did this go? I feel like my existing wiring for my 2013 Laramie is all there and ready, I just may have to change some things to get heated/vented seats and steering wheel to work again. All of the soft keys are visible just not enabled. No change after upgrading the driver seat module so...
I picked up a UAS P# 68332807AJ. These are the units out of the 2018+ Chrysler 200's with the aluminum cast mounting tabs on the bezels. In an attempt to use my bezel from my 2013 8.4, I had opened both units to find that everything was completely different. Not even the LCD mounting board is...
Still going thru about 8 different posts having to do with the 2013-15 trucks and HVAC issues. I'm trying to avoid ATC mod but it's looking like this is what I'll be left with. I like the dual zone and it is used often out here in Southern California. I'll keep ya'll updated..
68332807AJ UAS...
I opted to change out the module under the driver seat for the newer one (68217268AF) as I didn't like the idea of supporting Infotainment with the rumors of them converting the free information available here into personal profit. Also, CutomTronix needs to pull their **** together, that's one...
I too had already purchased this same module "68217268AF" before reading this. I hooked it up yesterday to my 2013 Laramie Mega/Cummins. I'm attempting to enable my soft keys for heated/vent/ seats/steering after upgrading from my Harmon to a UAS head unit. It seems that I will also need to...
I was just reading thru your heated seat post in order to enable them on my 2013 with the UAS. Surprisingly, my mirror dimmer worked out of the box with this unit, along with XM, I haven't had a single hiccup with anything but the heated seat steering wheel not being enabled. Even my reverse cam...
That's a surprising perspective. With me the newer units are night and day as far as quality goes. They look so much nicer and the colors are way sharper. It really makes me feel like I'm in an 18 Ram now, crazy. However, I did immediately throw a screen protector on just in case. SD cards are a...
Any updates on any of these issues? I just did an install on my 2013 Laramie from a Chrysler 200 without a single mod and everything works except the steering wheel and the seat heaters/AC. I'm really looking for some options here...AlfaOBD on standby..
I just gambled on a 4c from a wrecked 2018 Chrysler 200. These seem to be a little cheaper because of the non-interchangeable aluminum bezel and car they come from. After cutting off all of the tabs and hitting it with a flap-disk to smooth out the edges, I was able to fit my existing bezel from...
I just picked up a 2010 Ram with a blown 3.7L. I'm going to drop in another one and was just wondering what years of the 3.7L will be hassle free? Searching CL I've found a lot from older Jeeps and Dakotas. Can anybody help me save some time here?
I'm not interested in a Hemi swap or...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.