I couldn't decide which option I wanted, so that's why i removed the thermostatic spring valve behind the plastic end plug. This is an observation since the removal.
The valve controls the flow from both the heater and the cooler. When removed the transmission gets FULL flow heat and FULL flow...
I removed the thermostat valve, I wanted to see what would happen before I installed the revmax retrofit. I have driven about 100 miles since removed and haven't gotten a CEL yet.
Mufflex makes kits for the drone suppression. I myself made my own j-pipe very similar to their kit. I was able to reduce the drone at certain rpms, but it wasn't enough. The range at which it controls the drone is very narrow. Ultimately, I switched from the mufflex DOD24 with the j-pipe to...
I've flushed ws fluid from my Toyota before. That came out really clean looking at 60k miles.
When I first drained the 8 speed I wasn't expecting it to be so dark. When I saw it just as dark again, I didn't account for the dye affecting the appearance of the fluid. It did smell like fresh...
Thanks for the advice, I'm doing some research on fitment. I had read a review that the stock y-pipe had to be removed then reinstalled. I was hoping it would clear with stock setup, but I may have a muffler shop readjust that pipe lower. I do plan on getting long tubes,but that's way down...
Yes samples from 8 speed. The fluid doesn't smell burnt but it's too dark for my liking. I really want to change the pan next along with the filter. I'm looking at a PPE aluminum pan with extra capacity and replaceable filter.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.