RamRod37
- Posts
- 463
- Reaction score
- 479
Latest activity Postings About
-
-
RamRod37 reacted to caulk04's post in the thread Someone good with diagnostics, your help is needed with
Like.
Get a quality wiring diagram, you can buy into factory data for short term and it's quite reasonable. I forget the source though... Very... -
RamRod37 replied to the thread Difficult Start in the Morning.If it is the check valve in the pump try this next cold start turn key switch to on/run a few seconds then off and then back on again...
-
RamRod37 replied to the thread Second Crank Position Sensor in 8 months.One Mopar products & Chrysler they do not like aftermarket sensors especially crank and cam sensors use OEM sensors only
-
RamRod37 replied to the thread Someone good with diagnostics, your help is needed.deleted
-
RamRod37 replied to the thread Someone good with diagnostics, your help is needed.seeing how the TIPM (Fuse box) is prone to going bad I would say you have a wiring issue and the TIPM would be the best starting point...
-
RamRod37 reacted to Believer45's post in the thread Backed truck off ramps with exhaust disconnected and many codes came up with Like.
RamRod37, thank you for the reply. Good idea, I will dig into it on a warmer day. I do not have a garage and am working on a gravel...
-
RamRod37 replied to the thread Changed oil now truck shaking with codes HELP.I have seen Mopar do weird stuff on wrong oil weights since you changed filter/oils I would start with going back to what you was using
-
RamRod37 replied to the thread Changed oil now truck shaking with codes HELP.since the common thing here is low oil pressure and oil was just changed check oil level but could be too the MDS solenoid for cylinder...
-
RamRod37 replied to the thread Changed oil now truck shaking with codes HELP.P0306 Cylinder 6 misfire P1416 Dodge Code - Cylinder 6 Reactivation Control Performance What are the Possible Causes of the DTC P1416...
-
RamRod37 replied to the thread Backed truck off ramps with exhaust disconnected and many codes came up.looks like you got a wiring issue I would be back tracking where you was working that day on exhaust and check every harness near where...
-
Pull the head so you can get at the lifter that appears bad.I'd lay odds you're probably looking at doing both cam and lifters,as the...
-
RamRod37 replied to the thread #3 missfire..and no MDS is cylinders 1,4,6,7
-
RamRod37 replied to the thread What’s the best route for a nice aggressive tone for my 15 ram express 5.7 on a budget ??.I put flow masters Flow FX on mine I like it and no drone
-
-
RamRod37 replied to the thread MDS Already Bugging Me..mds has not one thing to do with cam & lifter failures my truck being a HD is non mds and had lifter failure and mine is not the only...
-
Nobody said anything about vvt and the claim that MDS is related to lifter failure has been exhaustively and effortlessly swatted away...
-
-
Loading…
-
Loading…
