RF hub progrm

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

M

My77blazer

Junior Member
Joined
Jun 21, 2017
Posts
10
Reaction score
5
Ram Year
2013
Engine
5.7 HEMI
I have a 2013 1500. The Truck wasn’t responding when I put the key in. It works sometimes after turning the key fob in the ignition quite a few times. Dealer said it was the RF hub and quoted $660 for repair. If I get the part myself(the one behind the backseat) do I have to program it and replace the key fob?
 
GTyankee

GTyankee

Senior Member
Supporting Member
Military
Joined
Nov 2, 2020
Posts
10,147
Reaction score
12,792
Location
El Cajon Calif. 92021
Ram Year
2016
Engine
3.0 ecodiesel
Which system do you have
Keyless Entry & Go
or
Fob inserted in the ignition ?
The Keyless Entry & Go has the RF Hub on the rear cab wall
The FOB inserted in the ignition does not use that module on the rear cab wall
..................................................................................

www.youtube.com

Dodge Ram 2009 2010 2011 2012 ignition cranks won't stay running, turns off

The Wireless ignition module / Node for the Dodge RAM 2009-2012 cannot be repaired. To order now click on the links below:***** Here is the Link to Purchase:...
www.youtube.com www.youtube.com
 
OP
OP
M

My77blazer

Junior Member
Joined
Jun 21, 2017
Posts
10
Reaction score
5
Ram Year
2013
Engine
5.7 HEMI
FOB inserted into ignition. So if it doesn’t use the RF hub then it’s probably the ignition switch/WIN module itself?
 
GTyankee

GTyankee

Senior Member
Supporting Member
Military
Joined
Nov 2, 2020
Posts
10,147
Reaction score
12,792
Location
El Cajon Calif. 92021
Ram Year
2016
Engine
3.0 ecodiesel
I would assume so, but there are ways to confirm

www.youtube.com

2013 - 2018, & 2019 (Classic) Dodge RAM Replacing Ignition Node RFHub Fobik Remote Part 2

2013 - 2018, & 2019 (Classic) Dodge RAM Replacing Defective Ignition Node RFHub Fobik Remote Part 2To order an Ignition Switch for a vehicle with an RF Hub ...
www.youtube.com www.youtube.com

www.youtube.com

Replacing/Installing WIN Modules (Dodge Ram 2012) Also 2009 2010 2011

Here we show you how to take out and replace a Wireless Ignition Node (WIN) module for a 2012 Dodge Ram truck. We sell these WIN module kits for $999.95 wit...
www.youtube.com www.youtube.com
 
WireEd

WireEd

Member
Joined
Apr 29, 2021
Posts
56
Reaction score
55
Location
Syracuse, NY
Ram Year
2021
Engine
Hemi 5.7
Both versions of ignition use the RFHub for that year, behind the back seat below the rear window. The Keyless Go variant uses some extra antennae in the vehicle for that keyfob to communicate (ie fob inside the vehicle to allow starting). The FOBIK, or what is called the "pignose" fob that you insert into the ignition module (IGNM) in the dash also has an RFHub. All 2012+ DS Rams use an RFHub, both for the ignition/Driver Authorization as well as communication with the TPM sensors (Tire Pressure). I worked for TRW where we made these parts for FCA. I used to go to the plants to deal with issues (WTAP and Saltillo for Ram and Toledo for Cherokee)
 
Fc3s25

Fc3s25

Junior Member
Joined
Jul 26, 2020
Posts
23
Reaction score
5
Location
California
Ram Year
2016
Engine
Hemi 5.7
If I wanted to change my "pignose" fob to keyless go would I be able to perform this IF I added the extra antenna & swap the ignition and possibly re write settings in RF hub?
 
R

RAMMERIT

Junior Member
Joined
Feb 12, 2024
Posts
1
Reaction score
0
Location
Virginia
Ram Year
2012
Engine
5.7
WireEd said:
Both versions of ignition use the RFHub for that year, behind the back seat below the rear window. The Keyless Go variant uses some extra antennae in the vehicle for that keyfob to communicate (ie fob inside the vehicle to allow starting). The FOBIK, or what is called the "pignose" fob that you insert into the ignition module (IGNM) in the dash also has an RFHub. All 2012+ DS Rams use an RFHub, both for the ignition/Driver Authorization as well as communication with the TPM sensors (Tire Pressure). I worked for TRW where we made these parts for FCA. I used to go to the plants to deal with issues (WTAP and Saltillo for Ram and Toledo for Cherokee)
Click to expand...
Hi, just bought a 2012 RAM 1500 seems to have RF hub issue. the Key FOBS are not unlocking/locking remote start etc. Batteries are good. Just had them reprogrammed. I removed the rear seat, but no RF Module was on the rear wall. I have the key pushes into the ignition to start. Do you know where the RF HUB would be?

Thank you
 
DILLIGAF

DILLIGAF

Senior Member
Military
Joined
May 28, 2016
Posts
4,274
Reaction score
7,729
Location
Canada
Ram Year
2012
Engine
5.7
RAMMERIT said:
Hi, just bought a 2012 RAM 1500 seems to have RF hub issue. the Key FOBS are not unlocking/locking remote start etc. Batteries are good. Just had them reprogrammed. I removed the rear seat, but no RF Module was on the rear wall. I have the key pushes into the ignition to start. Do you know where the RF HUB would be?

Thank you
Click to expand...

Same issue im dealing with MY12 right meow https://www.ramforum.com/threads/20...ad-the-electrical-gremlins-have-begun.206579/

Your RF hub is in the WIN Module, The back seat was 2013+
 
You must log in or register to reply here.

Similar threads

J
RF Hub fried from leaking window.
2 3
Replies
58
Views
7K
thjoseph13
T
K
2011 RAM: Key fob programming... only eight keys can be made?
Replies
1
Views
458
chopperman1
chopperman1
B
RF Hub Replacement
Replies
1
Views
2K
Fresh1
F
Runaround
Key fob problem
Replies
18
Views
1K
18CrewDually
18CrewDually
G
Ram 1500 Classic Center Console swap (need media hub)
Replies
7
Views
1K
houserco
H

Latest posts

Members online

Total: 545 (members: 21, guests: 524)
Robots: 1,581

Forum statistics

Threads
195,622
Posts
2,872,655
Members
156,453
Latest member
Jems007

Share this page

Top