lefave15
Junior Member
All, forgive me if this has been posted but for some reason I cannot find anything. I have a 2017 ram 1500 with the 3.6L gas engine. I purchased an OEM trailer brake module and Controller about a year ago and installed and flashed it via JSCAN. It worked well for about 4 months when one fall morning I went to start it and the trailer brake was turning itself on without a trailer attached and without the brake being pressed. Eventually the “Service Trailer Brake” message appeared. Some days it takes a nice bump to turn on while others it turns on immediately with the truck. I have pushed in all fuses/replaced all fuses associated with the trailer brake. I have searched for grounds beneath the truck and cleaned the up and have cleaned out the 7 pin itself. I’m pretty lost here. Any help would be greatly appreciated.
