Search results
-
Snow in apirl?!?
I would show you guys our weather but you would probably get mad at me. Today at 3;30pm temperature reads 90 degrees but feels like 96. in the 80's all winter this year except for a few days here and there in January it dropped down in the low 40's . believe it or not I scrapped my windows this...- Needyourhelp
- Post #54
- Forum: General Discussions
-
-
Misfire cylinder 6
I just changed out my lifters and cam. When i pulled the lifters out of The bix one rear set had a lifter that was not in the rail holder. I went to put it into the holder and it was like the holder shrunk. I seriously struggled until finally i got it to go in the holder but it was tight no...- Needyourhelp
- Post #11
- Forum: General Discussions
-
What is the best oil recommended
I ended up buying royal purple $30 something for 5 gallons. Thank you all!- Needyourhelp
- Post #17
- Forum: Engine & Performance
-
What is the best oil recommended
Wondering what the best oil I should use after a cam and lifters swap..? Prior to taking apart my truck motor I was using liqui Molly oil that seemed to Quiet down the Lifters considerably. I was thinking about buying this oil again but would like your guys opinion. I was looking up different...- Needyourhelp
- Thread
- oil
- Replies: 32
- Forum: Engine & Performance
-
Torque specs
Anyone know know what the torque specs are for changing a cam and lifters. Everything that’s involved, cam bolt oil pump bolts timing cover bolts oil pan bolts chain tensioner and guide bolts head bolts intake bolts what other bolts did I forget. What book do you recommend for me to buy that...- Needyourhelp
- Thread
- Replies: 1
- Forum: General Discussions
-
2012 5.7 Hemi cam lifter swap advice
How do I find out what the torque specs are for the intake, heads, lifters , timing cover and exhaust manifoldbolts should be. Pretty much all the bolts that involves changing lifters and Cam.- Needyourhelp
- Post #11
- Forum: Engine & Performance
-
2012 5.7 Hemi cam lifter swap advice
Thank you for the information Dug right in and waiting for parts . Pretty easy job being my first time. 2 lifters were bad , cylinder’s 2 and 3- Needyourhelp
- Post #10
- Forum: Engine & Performance
-
2012 5.7 Hemi cam lifter swap advice
Thank you for the information Dug right in and waiting for parts . Pretty easy job being my first time. 2 lifters were bad , cylinder’s 2 and 3- Needyourhelp
- Post #9
- Forum: Engine & Performance
-
Dreaded lifter failure
I have a 2012 ram with the same problem I just haven’t tackled it yet I’ve been driving around very carefully. I’m currently using liquid Molly oil With WIC filter it actually quiet it down a little sorry about the errors in spelling speech texting. What parts did you buy to fix your truck? I...- Needyourhelp
- Post #30
- Forum: Engine & Performance
-
2012 5.7 Hemi cam lifter swap advice
To respond to the first comment, those posts are old and never a follow through with the one that posts. Im looking for my current situation not someone else’s. Same answers , I use red something oil and filter. What im looking for is how hard is the job to do? Any step by step manuals i can...- Needyourhelp
- Post #7
- Forum: Engine & Performance
-
2012 5.7 Hemi cam lifter swap advice
- Needyourhelp
- Post #6
- Forum: Engine & Performance
-
2012 5.7 Hemi cam lifter swap advice
Misfire code cylinder 2 If i step on the throttle like to pass someone it will start to sputter. Tick getting louder.- Needyourhelp
- Post #5
- Forum: Engine & Performance
-
2012 5.7 Hemi cam lifter swap advice
I never done a cam and lifter job . Keeping MDS to make it simple What advise can you give me? What parts will I need? Can you give me a list of parts you used that is under$1000 Let me hear your stories on do’s and dont’s . My concern is buying lifters and they are noisy. Do i need to buy...- Needyourhelp
- Thread
- Replies: 11
- Forum: Engine & Performance
