So on all power wagons the idle should go up once the voltage hits 11.9 when winching. If you have a good enough big truck mechanic at your dealer they can go in and turn on the PTO function which would allow you to idle up the motor using the cruise control buttons. I had that done on mine but...
I am a technician at a local dealership here I think that I have the answer for you. Remove your parking sensors and make sure that the little white Overing that’s inside that goes around the head of the sensor is not rolled over. Make sure that it is clean and there’s nothing inside the bracket...
You can use whatever LED bulbs you would like if your truck throws a code for a light out all you need to do is go to the dealer and have them re-configure the truck using the building code for the LED lamp defeat. It’s easy to do and if you needed help I could actually alter your vin for you...
There is a kit available from Mopar comes with a new tailgate handle the camera and all the wiring it is a plug and play unit and the only thing that you would need to do is add the build code to your Vin number and then update the vehicle configuration. Actually just installed one at work
For some reason I can’t post in the for sale section so I wanted to put this up I would really like to get rid of this to make some room for some other ideas the whole Overlanding thing has not worked out in my wife wants to buy a camper. It is for a short bed with out ram boxes. Perfect if you...
For some reason I can’t post in the for sale section so I wanted to put this up I would really like to get rid of this to make some room for some other ideas the whole Overlanding thing has not worked out in my wife wants to buy a camper. It is for a short bed with out ram boxes. Perfect if you...
Here is where I put my ARB twin compressor ran a line down to a tank that I mounted underneath that holds about 5 gallons of air and I have an air chuck mounted in the hole on the right rear of the bed inside where the tiedown is compressor is completely protected from the elements and works...
With all of these radios you will need the four digit pin number to unlock it when you change it from one Vin number to another it will lock up more than likely the dealership will not fax us a pin number for you thinking that the radio may be stolen
I love all of the replies. I am big into riding my BMW adventure motorcycle and I pull it in a trailer this gives me a good base camp Tuesday when the weather is bad and a great nights sleep
You guys do not need any special programmers to do LED fog lights or fog lights on with highbeam or daytime running lights they are all factory build codes that can be added to the Vin number and then it re-configuration activate everything
It is a build code activation that has to be added to your Vin number you have to have a special access to do so when you’re in dealer connect and you click on the service tab it is under the warranty administration’s and I believe it is called vehicle build update maybe. If you do not have...
What do you want to know. I am not going anywhere lol. Been a member for some time. Got a new job at a new dealership and took some time away to gain my master mechanic certification
Got tired of having to have two people to put up my two separate awnings. Took those bad boys off and installed this phenomenal new awning that can literally be put up in minutes drone footage of the awning going up coming soon
A good set of HID bulbs in the low beams and some decent LEDs in the highbeams is the way that I went. then I added the build code to turn off the canbus bulb monitoring and that cancels the need for any of the little tricking devices and you get full power to the headlights
It can be removed. it is not for a snow plow as the power wagon is not available with the snow plow prep package. It is refered to as a compatibility beam. It is there to keep the truck from driving up over another car if you where to rearend some one smaller then you. they dig in to the car.
YOU NEED TO DO A VIN RESTORE ON THE TRUCK. NEEDS TO BE DONE AT THE DEALER. WEHAVE TO PREFORM THIS SOMETIMES WHEN INSTALLING NEW RADIOS. TELL THE DEALER YOU NEED A PROXY REALIGN.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.