Hello,
Just want keyless entry. Which system off amazon works with 1994-1996 (without locking module). I know the door lock voltage reverses, kit I have now wants additional relays.
Any help much appreciated.
Replaced the wiper switch and that fixed it. Autozone had it stock so I replaced it again (switch was replaced 3 years ago from Autozone).
My wiper motor is the original and the cover is riveted. If the cover has screws its probably a reman. I replaced the motor with Cardone, good...
Mine did the exact same thing last week. Intermittent wiper don't work and wipers won't park. Low and High does work. I can tell you its not the intermittent wiper module. I'm going to try the wiper motor.
Tony
Hello,
For my 1500 I am about to purchase the skyjacker DR56S lift springs My plan is to remove the 4" block, raise the rear 2" with just using the spring.
Do I need a block to sit on top of the rear axle to locate the leaf spring?
Has anyone installed a 2 degree pinion wedge shim for u-joint...
Looking to replace rear leaf springs in my 1500. Who makes a good quiet leaf pack? My truck is not lifted and tow twice a year. I imagine the 1705# spring has a better ride than the 2200#
If I get ride of the lift block by is the ride smoother?
Thanks in Advance,
Tony
Well I was able to use a zip tie and secure the end. Just bugs me that parts are becoming obsolete. I thought rust would be the deciding factor to sell her.
2
CONTROL
CABLE, Heater Control Temp.
55035620
I could not get the heat to turn off. When the dash was pulled back the heat control cable was popped off the door lever, the lock clip had broken off. Cable is discontinued from Mopar but is there any aftermarket replacement?
Thanks
Ok so I am up to the camshaft.
So what cam do you suggest using EQ heads 1.92/1.63 valves. stuffed Kegger and short headers. I want to keep the 1996 PCM, no tune. Just looking for increased engine displacement.
Is there a off-shelf camshaft or do I need custom grind?
Thanks in advance.
I went from 3.55 to 4.10 on 32" tires. My driving is mostly hills and love the acceleration. The transmission now knows what to do and will hold a gear going uphill. Fuel mileage when up in the city, hiway stayed about the same 12-13 MPG.
I went with the alburn traction unit. Just going...
Ok thanks, that's what I wanted to know that the 1.92 is a good match for the kegger and maybe the better choice for unshouding the valve compared to a 2.02.
The kegger intake will be extruded honed and stuffed to increase the velocity. I was also going to change the cam for something with...
Hello,
I'm starting to build a very mild 408 using the kegger and FI. Should I use 1.90 intake valves or 2.02?
Engine RPM will be idle to 3000 RPM. Thanks
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.