Please do not attempt this. You will need a custom control arm or a spring specifically made for that suspension setup which is going to be super tough.
I actually had to remove the cross member and reweld the holes I did under the original lower control arm holes. It was a big waste of time, headache and hole in my wallet. Upper control arm angle was fine in my view. As someone else had mentioned I think the issues came about due to the lower...
It has a 7 inch Maxtrac lift. 35 inch tires. Alignment was good and it had no issues. I put a cross member from a rough country lift kit on it. This lowered the control arm connection points on my truck by 4 inches. On the front the cross member didnt align with the oem hole so we decided to...
So the problem was I had to make holes right under the oem location for the control arms to go in. So now If I try to put the control arms back in they will be lower on the front which I think is maybe dangerous or could cause issues. I was thinking to weld that up but not sure if thats a safe...
So I decided to pick up a cross member for a 4wd 4thgen ram 1500. I wanted to put this on my ram 1500 2wd. I already had a maxtrac 7 inch lift on my truck so I figured it would help lower the lower control arms so they wouldn’t sit as high on the part where they mount on the truck. Unfortunately...
Im trying to upgrade from the 3.21 gears currently on my 2014 ram 1500 2wd running 35s. I have found some oem 3.92 axles or a yukon 3.90 kit. I have found a kit on jeggs performance for $1,300 that includes everything I would need (I believe). Will provide link below. Is this a good kit and...
I have a 2014 Ram 1500 with the 8 speed transmission. I got quoted but Im at disbelief with the costs. I wanted to hear numbers first but from people who have actually had it done. Real numbers please. This shop was referred to me by a friend but im not too sure about the price. Obviously a...
Alright guys I took it in and its fucked. Im not sure if I did it with the flush or if it was like that before hand its going to need to be rebuilt. I will still take it to the dealer next time when it comes to important stuff like this. Trying to save money probably cost me more.
Do you think I should trust a delership with the job or should I go to a place that specializes in transmissions? I Kind of dont trust other shops as everyone claims there is a special process.
2014 Ram 1500 5.7 with the 8 speed trans. Decided to change out the trans fluid as my buddy got a discount on some he bought. Didnt replace the filter. Shifted through the gears. Only took me 4 quarts instead of the 9 I thought it needed. Now my troubles start. When I accelerate hard from 0-40 I...
I lifted my truck in late January this year. Got the maxtrax 7inch lift (2wd). I had heard of the issues with the UCA failures and I asked but everyone said not to worry. Im looking at them now and I just want to make sure this looks ok?** Images attached** I would greatly appreciate any...
Im looking to getting the Maxtrac 7in lift kit for my 2wd ram. Im looking at a lot of reviews but some mention the need of wheel spacers in the rear? Is this true? Also someone recommended that I get new upper control arms if my truck has high mileage. Any advice on any of this. Im on a budget...
I have a ram with 90k miles and the powertrain warranty expires the end of this year or if I am to hit 100k miles. Ive gotten my alignment done twice and the guys said something was wrong with my truck so they couldn’t adjust the steering wheel perfectly. They showed me the alignment sheets and...
Im running the recommended mopar oil filter and for oil its some cheap penzoil (high milage,fully synthetic) but from what im hearing its a huge mistake. I go out to run the truck every weekend but only for 1-2 hours straight. Thats what worries me as its still running race after race and im...
Basically we drive out for 10 mins and then its 40-100 rolls, line up again, race, etc. Typically flooring it for a good few seconds. And then back to lining up. Im going to take more breaks for sure.
Went a did a few runs on the highway here in texas, was about 75-80 degrees outside probably. After a few pulls (50-90mph) my oil was at 240 degrees and it got me a little worried lol. Is this temperature ok or should I let the truck cool off more .
5.7 Hemi 2wd Stock
I really like the way ford has their dual glass “panoramic roof”. There is a gap in between the 2 pieces of glass but it all looks sleek and nice. Ive seen a couple guys get an extra sun roof in the back but it looks really ugly in my personal opinion. Is there anyone that has seen as a ram with...
I have a 2014 Ram 1500 Sport and I believe its called ambiet lights (lights that are by where your feet go). From what i can see its a total of 4 lights. 2 in the front and 2 in the rear which are under the seats. I want to change those to leds. Dont like the yellow look since I changed all the...
I have a Ram 1500 Sport and I noticed a little but deep scratch on my dash. I noticed that other trims have plastic dashed but the sport and above I guess have this hard leather looking surface. Anyone know a way to maybe fix this? Thanks in advance
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.