Search results
-
Lowered 4th Gen Pics - Show Em Off!
just lowered mine on H&R springs with Monroe reflex shocks and struts. -
2011 Ram 1500 Stock Goodyear Wrangler SRA tires
I bought my 17 new. I ran them Good Year tires for about 24k miles, one got a steel shank in it off the road. I replaced them with Michelin's defender. It was definitely a step up in traction. they still spin some in the rain, my truck has 3.92 gears. this will be the first winter coming up with... -
Ceramic Coating lifespan
My take on ceramic coatings, great for wheels and glass. Paint I prefer wax. I do my best to keep my truck looking good. But, I also abuse her during winter(road salt) and summer(hitting bugs at 90 mph). I already know by pay off time it will need repainted. I already see factory paint defects... -
1600 RPM noise while accelerating
It could be a wheel bearing, could be belt tensioner/ idler pulley or any other pulley locking up. if 4wd cv shaft as the guy above mentioned. could be a u joint. carrier bearing. keep in mind sound can travel. best way to check pulleys is to remove belt and see if any have slop or too stiff to...- IndyDon
- Post #3
- Forum: Engine & Performance
-
Engine ate the cam!! Need opinions on what to do?
I would not want the headaches that come with the swapping of different engine set ups. You really are not gaining much between a stock 5.7 and stock 6.4. Get yourself a sheet of paper and pen. write down what you want. None of us in these forums know what you want. The most reasonable is cam...- IndyDon
- Post #8
- Forum: Engine & Performance
-
Brake line replacement writeups?
man I know some of your pain on some of the older vehicles I owned. If worse comes to worse pull the block off the truck and go to a parts store to find what threads in. I had a 70 chevy panel truck and I broke that block by trying to break a fitting loose. well, no one can even get the block. I... -
How to turn radio off
I have a usb stick so I don't have to listen to a crappy radio station. Really all you can do is turn the volume all the way down. I turn mine all the way up and when I shut it off and start again the volume is always less than half way.- IndyDon
- Post #27
- Forum: Audio & Electronics
-
Any of you guys have the Mopar Floor liners?
I have factory ones that came with my express. I live in the midwest. I wouldn't trade them off. My rear is one piece and I rarely have back seat passengers. driver side doesn't go under the throttle peddle. -
Wheel offset to keep close to factory appearance
I am wanting to go a little wider foot print than stock. I am working on turning my truck over to a pro touring truck. -
-
Strictly the 4x4 lowering thread...
thanks for the reply Corey. I have a 4wd also. -
Your Chrome honeycomb inserts
find an express. I am wanting an extra myself to paint to see if I really want to keep stock, paint candy apple red or a metallic silver. just been too lazy to go to salvage yards with late model vehicles -
Saying goodbye to Ram...
my coworker has a 2017 f350 and has had nothing but trips back to the dealership.- IndyDon
- Post #26
- Forum: General Discussions
-
2017 1500 recalls! fuel tank, engine stop
mine is a 26 gallon tank. both of your issues I would bring up. should still be in warranty window. when I took mine in. I think 2 were updates, one was airbag module and the other is tailgate. Mine is a 2017 express.- IndyDon
- Post #2
- Forum: General Discussions
-
Wheel offset to keep close to factory appearance
I am look to get a set of 20 x10 wheels next Spring. My question is. What offset would I need to keep the same or close to the same backspace as factory 20 inch wheel. I am assuming my wheel is 9 inches. I kind of get lost in the metric system vs standard. -
Ram Dealers begging for positive ratings?
I have had pretty good luck with three dealerships and kind of a crappy deal with one. the one was because the salesman was trying to force a sale I was not interested in. to be honest it takes a lot of horse crap for me to put in a negative comment. I have done my share of retail and services...- IndyDon
- Post #91
- Forum: General Discussions
-
Strictly the 4x4 lowering thread...
Corey was this a complete bolt on set up or is there some cutting needed? love the stance. this and a brake upgrade is next for mine. -
Rubber Molding
mine is a 2017 express doing the same thing. if you are still under warranty go back to the dealer. -
Bronze Rims on Granite Crystal Metallic
the wheel is cool, but I believe there would be a style clash. when I see large multi spoke wheels. I think of Lincolns. I wouldn't shy away because of bronze, but the wheel style. -
Driving Without a Grill
no, only thing is more debris would get caught in your condenser. for the most part a grille is an appearance piece. -
Dealer oil change
the reason 5w20 is the selected oil has to do with cylinder cut out lifters. Here is where I may be wrong, but read somewhere. Is that the wrong weight of oil could cause issues with those valves or lifters. But like this indivdual says or let the dealer know they put the wrong weight in. To br...- IndyDon
- Post #3
- Forum: Engine & Performance
-
Tire age??
I never heard of the brand you have, but when it comes to cheap brand tires. I work on tractor trailers. If I see any sign of a possible blow out. Like cracking tread in a lot of spots. I replace them. I have seen many aftermaths of tire blow outs. Probably my favorite blow out, was the one the... -
Tire age??
right after the DOT number in the oval is the major info on that tire. I believe the date is done by week and year, 3614 meaning the 36th week of 2014. -
Pulsar vs Trinity 2 PCM Swap
I just recently purchased mine thru hemifever. Which I believe is about 50 bucks more than other places, but it has hemifever stage 1 included with it. you are looking at a 200 dollar difference between Pulsar and the trinity with pcm swap. I just went with the intune 3. I think the info I have...- IndyDon
- Post #15
- Forum: Engine & Performance
-
Problem with Parasitic Draw
I would check your door switches first. Another reason for the draw from the cluster, is if you have remote locks. Your keyfob when close activates your cluster to light up. At least mine does.- IndyDon
- Post #2
- Forum: Audio & Electronics
