Wheel offset to keep close to factory appearance

[IndyDon]

I am look to get a set of 20 x10 wheels next Spring. My question is. What offset would I need to keep the same or close to the same backspace as factory 20 inch wheel. I am assuming my wheel is 9 inches. I kind of get lost in the metric system vs standard.

 

[buddy guy]

It could be 20 x 8 too. Its on either the driver door sticker or on the pillar where tire pressures are.

Sent from my SM-N960W using Tapatalk

 

[Ohio5pt7]

You want +18 if you want stock look or line up.

Sent from my SAMSUNG-SM-G891A using Tapatalk

 

[Graygoose]

I have 20x10 with -24, but with 35's, they stick out

 

[Ohio5pt7]

Check out customoffsets.com go to gallery and filter offsets if you dont want it to stick out you will want a + offset

Sent from my SAMSUNG-SM-G891A using Tapatalk

 

[buddy guy]

just got my new wheels on. its a 10 offset instead of 18 which with the same tire on, puts the rims 1/3 of an inch more out. i couldn't tell the difference if you told me on how far out it is, but where before i couldn't get my forefinger 2nd knuckle between the tire and uca, i can get my whole finger in there now and wiggle it. i "might" go a bit wider tire in the future, hence my change on the offset.

 

[IndyDon]

thanks friends.

 

[IndyDon]

just got my new wheels on. its a 10 offset instead of 18 which with the same tire on, puts the rims 1/3 of an inch more out. i couldn't tell the difference if you told me on how far out it is, but where before i couldn't get my forefinger 2nd knuckle between the tire and uca, i can get my whole finger in there now and wiggle it. i "might" go a bit wider tire in the future, hence my change on the offset.

I am wanting to go a little wider foot print than stock. I am working on turning my truck over to a pro touring truck.

 

[buddy guy]

here is a good calculator for everything related to wheels and tires. you can plug in different offsets and it will tell you at the bottom how far the rim..and tires will move in and out. the tire sizes plugged in can be changed. that's just what my last tire size option i tried out was.

https://www.wheel-size.com/calc/?wh...-60-20X9ET8&fcl=70mm&wcl=50mm&scl=20mm&sr=0mm

 

[ilovemyramlaremie]

20x 10 - 12 offset.
My truck in the avatar picture wheels are 20x10 - 19 offset