️ New Truck Build: Stage 1 Complete! Seeking Input!

[Marine4Lyf]

Just wrapped up the first round of mods on the truck & I'm loving the results!
Current Install List:
*Protection: Tonneau Cover & Spray-in Bedliner
*Aesthetics/Utility: Running Boards
*Performance: S&B CAI & Borla ATAK Cat-Back Exhaust
*Audio: Replaced all 6 factory speakers with Infinity Reference Series
The ATAK sounds mean & the audio upgrade is night & day.
Question for the community: What would you add next that would really complete the look? I'm open to anything from lighting to suspension. Give me your best ideas

 

[RAM DRVR]

Tint front door windows.

 

[Marine4Lyf]

Tints are on my wishlist Did you just do the front 2 or did them all to match & what was the cost & brand?

 

[RAM DRVR]

Did the front to match the back. About $125 total.
Don’t remember brand.

 

[UPSman]

Depending on what look you’re going for……on my 21 model I did 2” Motofab level spacers on front, 33x12.50 Radar Renegades on the stock 20’s with 1.5 inch KSP wheel spacers. Nice stance and not overkill.

 

[Adamcr68]

Tints are on my wishlist Did you just do the front 2 or did them all to match & what was the cost & brand?

2nd the front window tint, I didn’t get mine as dark as the back to avoid problems with state inspection.
The difference in shades isn’t as noticeable as having no tint to me, so no regrets.

 

[Hawkman]

Tint front door windows.

I agree. Tint the front door glass to match the rear. Should be between $100 and $125. Depending on the quality of the film.

I would also do the top of the windshield, down to the ASE line. Helps the look, especially on your black truck. And cuts down on the intense sun glare coming through the top of your windshield glass.

We did our RAM, and the Durango you see in the garage.

 

[UPSman]

I’ve done 20% on the fronts. Seem to match up pretty close with the stock rear windows.