1.75 bora spacer

[BIGDAWG2472]

Could someone please tell me how much negative offset I would create by adding a 1.75 inch bora spacer to a 0 offset wheel. Thanks

 

[ilovemyramlaremie]

Very close to -12 offset

 

[BIGDAWG2472]

Thanks

 

[BOWERSFJ]

Very close to -12 offset

No ... Offset is measueed in millimeters ... 1” = 25.4mm ... 1.75 X 25.4 = an additional -44 offset


Sent from my iPhone using Tapatalk

 

[WilliamS]

No ... Offset is measueed in millimeters ... 1” = 25.4mm ... 1.75 X 25.4 = an additional -44 offset


Sent from my iPhone using Tapatalk

0 Offset, math above is -44 I hope you have a good lift as a -44 is hanging way out there!

 

[ilovemyramlaremie]

No ... Offset is measueed in millimeters ... 1” = 25.4mm ... 1.75 X 25.4 = an additional -44 offset
Hummm. I had 1.5 spacers on my stock 20 inch wheels, barely noticeable sticking out. All the wheels offset that I’ve seen- 44 is way way out past the wheel well.

Sent from my iPhone using Tapatalk

 

[BOWERSFJ]

Stock 20 x 9’s are +19 offset ...


Sent from my iPhone using Tapatalk

 

[BIGDAWG2472]

Yeah I just read that thread that explains the math and the offset thanks for the info guys