2006 3500 no Infinity amp or steering wheel controls

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

John Evans

Junior Member
Joined
Dec 11, 2017
Posts
14
Reaction score
2
Location
Richmond BC
Ram Year
2006
Engine
5.9 l diesel
Hello
my 3500 does not have the Infinity amp so I have read that I do not need a CANBUS harness for an after market radio, true or false, or easier with the CANBUS harness?
From what I read simply connecting the red wire from the radio to an ACC circuit is all that needs to be done to get it to work?
Oddly when I use the 12 volt cigarette lighter as a source the radio comes on but does not turn off when I shut off the ignition, despite that the source is ACC.
At 67 years old I have installed a few radios over the years but none such a PITA as this truck.
Cheers

This is the harness I am currently using https://www.amazon.com/dp/B0CDZQGJS5?ref=ppx_yo2ov_dt_b_fed_asin_title
 

HemiLonestar

Senior Member
Navy Badge Coast Guard
Joined
Jun 1, 2012
Posts
6,809
Reaction score
4,686
Location
MD
Ram Year
2016
Engine
5.7 hemi
As long as you use a harness that interfaces properly with the truck so you don't start hacking up the onboard CAN you will be good.
 
Back
Top