2013 Tow hooks - front

[hanadarko]

I ordered the Mopar tow hooks for the front along with what I thought was the correct filler panel, that was pre-cut:

Model(s): Ram 1500
Model Year(s): 2009 2010 2011 2012
Part Number(s): 68088193AA


Seems this stopped at 2012. The part I have isnt even close....right idea but wrong size/design.

Does anyone know of a part number for a pre-cut panel for a 2013 Ram 1500 Laramie (chrome bumper) ? - or if one even exists?

Thanks,

Hanadarko

 

[Asur]

Check out this section, if you don't find it there, post asking for it, they should come back pretty quick with the info

All Mopar Parts - DODGE RAM FORUM - Dodge Truck Forums

 

[MrHarleyGuy]

68196982aa

http://allmoparparts.com/oemparts.php?partstr=undefined/68196982AA.html

This is what i bought from them. I have a BigHorn, but its the same chrome bumper as yours.

 

[hanadarko]

BINGO....thats the part I need. They are 2 separate parts vs one long part.
I have the chrome bumper. I need item #22 and have item #21 right now.

How hard were these to remove?

-HANADARKO

 

[MrHarleyGuy]

They were easy, two bolts I believe.

 

[hanadarko]

No i mean the plastic filler parts. I ordered them from my dealer today vs online and paying shipping (it was about a break even) - they show they work for my VIN.

I see how to mount the tow hooks (loosen two bumper nuts and install 1 new bolt) per side but wondering how these filler panels are installed.

Hopefully they come out and back in from the backside - otherwise the bumper will have to come off!! OMG

 

[MrHarleyGuy]

Yea, filler panels are 4 bolts each not two. Was easy. They slide out after removing the bolts.

 

[greychevy]

Anybody know if the precut insert will fit on an express? Not sure if my insert is different then someone with a chrome bumper.

 

[MrHarleyGuy]

Those panels that I listed are for 13+ NON-sport/express bumpers. There is a filler panel for the 09-12 ram with chrome bumpers. Don't know if it will fit the sport/express models. I'm pretty sure to fit tow hooks on a express/sport you will have to cut out the openings in the filler-panel yourself.

 

[smoothee]

Yeah, you'll have to cut the holes yourself on the 09-12 (not sure about 13's and up) Sport/Express models. I just used a utility knife from the back side, turned out pretty clean, IMO.

 

[greychevy]

Thanks guys

 

[CaliDodgeRam]

Just ordered mine from a mopar part site for my 12' express, said it should fit on there if not they refund it shipping and all so i figured I'd give it a shot! Ill let you know if it works!

 

[Jmhm17]

Pics? Id like to see what you guys are even talking about. I have an express, but would love to see where tow hooks pop out or even under the bumper as its kind of low

 

[jbr]

2012 model is shown in this link.
http://www.ramforum.com/showthread.php?t=34710

2013 bumper is different.

Sent from my DROID RAZR HD using Tapatalk

 

[Jmhm17]

Thanks for the link! I'm assuming its the same idea tho..

 

[iam_canadian22]

Correct 13 is same thing just need to cut out the holes


Sent from my iPhone using Tapatalk