2014 Ram 3.6L Gas looses power under load

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

usbp_603_best

Junior Member
Joined
May 29, 2023
Posts
1
Reaction score
0
Location
Las Cruces NM
Ram Year
2014
Engine
3.6L Gas
Hi all, so I’m new to Rams and to this problem. I have a 2014 Ram 3.6l gas. Normal around town driving no issues but when I get on the interstate and it has load or high demand for a while it will suddenly loose speed, govern down, and the traction control light and check engine light come on. If I pull over and turn it off and on the traction control light goes off and all power/ speed is restored. What could cause this?
 

jws123

Senior Member
Joined
May 16, 2018
Posts
2,100
Reaction score
2,019
Location
nj
Ram Year
2014
Engine
5.7
You need to have someone with a good scanner scan for codes not a autozone scanner.
 

Rado

US NAVY VETERAN
Military
Joined
Nov 5, 2016
Posts
6,912
Reaction score
19,022
Location
Maine
Ram Year
2015
Engine
Pentastar 3.6 V6
As mentioned get a Scan from a Mechanic,, Auto Zone shops only have a basic scanner ! If you have a regular shop most will not charge you for a scan !
Your problem could be anything from a weak fuel pump to a bad catalytic converter ! bad coils etc ! Hard to trouble shoot over the net !
 
Top