2016 ATC and heat/cool seats/wheel problem

[DeereGuy]

If you look at his first post you will see that his connectors are almost fully populated so he probably has the wiring in place. He flipped the BCM setting on and it probably works.

I enabled the door lights with no problem and I know a few others that have done so also.


Sent from my iPhone using Tapatalk

 

[WilliamS]

Dang the prewire the SLT HD for everything!

 

[chamolie]

Enabled door handle light, map pocket light, driver memory mirror and passenger memory mirror, went for drive, tested all vehicle options and no issues.
I set memory profile 1, went for a drive then moved the seat and mirrors out of adjustment intentionally, loaded memory profile 1 and the seat moved back as expected but the mirrors DID NOT move back!
I will have to find a tech doc for the wiring to the mirrors and see if the CAN is in fact connected to the mirrors.
but, as I stated, enabled the driver and passenger memory mirrors with no issues.

Tomorrow, I will check DTC codes, clear DTC codes then go for a drive and check the DTC codes again.

 

[Ricks Ram]

Oops sorry I didn't catch it in the first post. That's strange I have seen some SLT's that basically didn't come with any extra wiring at all and we're basically pretty much the same as an Express/Tradesman and then you have his truck that pretty much seems to have everything. I know the Big Horn SLT package has all the wiring but I've never seen a regular SLT with it. That's definitely good news for him. I'm pretty much the only one that drives my truck so the memory is not really an issue but that being said it would still be a pretty cool option to have.

Sent from my SCH-I545 using Tapatalk

 

[King nothing]

Oops sorry I didn't catch it in the first post. That's strange I have seen some SLT's that basically didn't come with any extra wiring at all and we're basically pretty much the same as an Express/Tradesman and then you have his truck that pretty much seems to have everything. I know the Big Horn SLT package has all the wiring but I've never seen a regular SLT with it. That's definitely good news for him. I'm pretty much the only one that drives my truck so the memory is not really an issue but that being said it would still be a pretty cool option to have.

Sent from my SCH-I545 using Tapatalk

So you were able to add memory seats without adding any hardware? That a feature I’d love to have. My wife is about 9inches shorter than me, and although my son is the same height as me, he messes my seat up every time he gets in my truck


Sent from my iPad using Tapatalk

 

[HEMI_Finn]

So you were able to add memory seats without adding any hardware? That a feature I’d love to have. My wife is about 9inches shorter than me, and although my son is the same height as me, he messes my seat up every time he gets in my truck


Sent from my iPad using Tapatalk

DAMN! If I didn't know better, I'd think that I posted that! I'm also interested in adding memory for the drivers seat.

 

[skuppy069]

So when you added the memory options does it show up on the radio ?
Also how about the. Mirrors aiming down when put in reverse ?
Anyone else try this yet as well ?

 

[chamolie]

Do you know where the memory option show up on the radio?
Don't believe that i have seen it.
The mirrors definitely do NOT tilt down in reverse, but I have seen that option in Vehicle Config CSM2 - option 6
Has anyone tried to enable this feature?