20x10 with a -24 Offset on Leveled 2013

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

BLKMAGIC

Senior Member
Joined
Mar 19, 2013
Posts
550
Reaction score
118
Ram Year
2013
Engine
5.7 Hemi
So I am currently running factory wheels and tires on my 2013 QC 4x4, which is leveled 2.5/1.75 with the Rough Country kit. I am looking at doing 35/12.50/20 rubber (probably Federal Couragia MT unless I can get the right price on Trail Grapplers) and was going to keep my OEM express wheels with 1.5" spacers. BUT I finally found a wheel I really like, which would be in a 20x10 with a -24 offset. Would I be ok with the offset in this size, or am I going to have a lot of trimming to do? Any guidance would be greatly appreciated!
 

Sybil

Senior Member
Joined
Jul 7, 2013
Posts
1,153
Reaction score
394
Ram Year
2011
Engine
5.7 hemi
BUT I finally found a wheel I really like, which would be in a 20x10 with a -24 offset.

What wheel for those of us looking as well?
 

quietpeen

Senior Member
Joined
Jul 14, 2010
Posts
25,443
Reaction score
3,913
Ram Year
2021 TRX
Engine
Hellcat
there is a good chance you will rub the fender by the door
 

RamED

Junior Member
Joined
Nov 24, 2014
Posts
27
Reaction score
22
Location
Vriginia
Ram Year
2009
Engine
Hemi 5.7
Probably will have to go with at least a 4" kit - with that offset wheel. Larger tires look so much better without the skinny factory rim. Probably cost more but you will be happier in the long run. At least for now since your stock rims are 20's you wont need new tires right away when you upgrade your wheels.
 
OP
OP
B

BLKMAGIC

Senior Member
Joined
Mar 19, 2013
Posts
550
Reaction score
118
Ram Year
2013
Engine
5.7 Hemi
Hmmm...you think its a trim fix rub or more serious than that? I wouldnt mind doing the PA 3" body lift, but probably wouldnt be able to do it for a couple months after doing the wheels and tires.
 
OP
OP
B

BLKMAGIC

Senior Member
Joined
Mar 19, 2013
Posts
550
Reaction score
118
Ram Year
2013
Engine
5.7 Hemi
I could do a 20x9 with a 0 or 18mm offset...but like the stance that would come with the -24 and extra wheel width...what are you running quietpeen?
 

Sybil

Senior Member
Joined
Jul 7, 2013
Posts
1,153
Reaction score
394
Ram Year
2011
Engine
5.7 hemi
Sorry to hijack but does anyone know what would be the ideal offset for a 20x10 with 305's on a QC 4x4 with factory ride height? Or is this even possible????
 
OP
OP
B

BLKMAGIC

Senior Member
Joined
Mar 19, 2013
Posts
550
Reaction score
118
Ram Year
2013
Engine
5.7 Hemi
Yea 33's would definitely fit, but I am set on 35's...i believe the 0 offset would be the way to go, but if its minimal trimming to get me through the -24 is what I would really like to make work
 
Back
Top