325/60/20 on stock with 4" RCX?

[14SLT]

Hi guys,

I just had my 4" RC lift installed with Bilsteins at 0.7. I just found a good deal on 325/60/20 BFG KM2s and I'm wondering if they'd rub on the stock 20x8 wheels with 1/4 spacers?

 

[xrsman]

Those tires require a min 9" wide wheel according to the Tire Rack. I don't know a whole lot about that stuff, but hopefully someone else who does can chime in here.

If that set up works you shouldn't rub though.

 

[Csanders1992]

You could put those on your rims fine, you'll just have to adjust the pressure to get the best wear. I'm not sure if they would rub or not though


Sent from my iPhone using Tapatalk

 

[THETANK]

you can put 325's on a 8" rim fine, ummmm yeah I would not but hey it's your life.

 

[14SLT]

What would the downsides be to running them on an 8" rim? I'm getting them for a steal and hate to pass them up.

Sent from my SM-G925W8 using Tapatalk

 

[fordtech90]

I've got 325/60 terra grapplers on my 8" wheel. I only rub just a little when in full left lock. Running 38 psi.


Sent from my iPhone using Tapatalk

 

[Drummin4jc]

Yea, they should fit but like others have said, adjust your pressure to get the best wear out of them.

Adam

 

[6.7CumminsDrvr]

They will fit..........manufacturers list suggested rim width's for the best wear and handling. With that size combo, you are pulling the sidewall in a smidge more than ideal which may cause the outside edges to wear a bit faster. As stated above, monitor your tire pressure and you'll probably have to rotate them more often.

Oh ya, don't expect not to feel a little bit of "roll" if pushing in turns or cornering.