4th gen 6 inch bds with road armor bumper how big of tires

[checjeff8r]

The bds website recommends 37s but they look small and I think it looks like I could clear 40s. Anyone know?

 

[jadocs]

Road armor is only going to give you more clearance to the front (towards the bumper). Don't forget that you also have sheet metal to the rear. Not to mention the rear tires. If you are going to jack up a truck you should have some usable articulation unless your just looking for a mall crawler.

 

[checjeff8r]

Yeah my big as 4th gen is a crawler Re you a retard? I actually do have a real rock crawler and this truck is its tow rig. Just want the tires to look right on it as I six the 37s dont. The control arms are what I'm worried about. Who would me a brand new 68 thousand dollar hey as diesel a crawler idiot

 

[gassersarentdead]

^^^ what the **** did you say

 

[6.7CumminsDrvr]

You won't clear 40's with just a 6" lift.

And ease up a bit. First responder is just pointing out the fact there are other clearance issues and you asked a question without any other specifics.

And welcome to the forum.

Check this out:
http://www.ramforum.com/f38/my_new_ram_2500-_6_lift_37_tires-69038/

 

[RamWagon]

Yeah my big as 4th gen is a crawler Re you a retard? I actually do have a real rock crawler and this truck is its tow rig. Just want the tires to look right on it as I six the 37s dont. The control arms are what I'm worried about. Who would me a brand new 68 thousand dollar hey as diesel a crawler idiot

Maybe be a little more clear when making a post. No need for that here

 

[jadocs]

Yeah my big as 4th gen is a crawler Re you a retard? I actually do have a real rock crawler and this truck is its tow rig. Just want the tires to look right on it as I six the 37s dont. The control arms are what I'm worried about. Who would me a brand new 68 thousand dollar hey as diesel a crawler idiot

I wasn't trying to be derogatory. If you are going to use it as a tow vehicle, I would rethink the lift and especially rethink throwing 40's on there.

 

[jstacey8]

You know what go for throw some 40's on there or why not 42's but just post pictures of your fenders when your done

 

[Hitman0002]

I say do it it if you want IMO I think 40s are to big. 37s will look great. 40 you might have to start trimming the body of the truck.

 

[Thatdude596]

^^^ what the **** did you say

Sounds like he's the mushmouth! *****