5th gen 2020 Ram 2500 Blend door location

[omerbayer]

Can anybody help me with a 5TH GEN blend door location ? I have heat on the passenger side but luke warm air on the driver side. Any help will be appriciated.

 

[markabby]

dumb question: are the settings "synced" to be equal temps?

 

[crash68]

Can anybody help me with a 5TH GEN blend door location ?

I think the HD trucks may still use the Gen4 HVAC assembly.
Not sure how many miles are on the truck but the HD trucks seem to have a higher occurrence of the heater core plugging up. The first signs is the driver side is not as warm (or just cold) compared to the passenger side. The plenum is divided top an bottom and the bottom feeds the driver's side which is also the bottom of the heater core.
There's multiple posts on the forum about the problem

 

[omerbayer]

So it would be under the heater core?

 

[crash68]

So it would be under the heater core?

This might help:

blend door actuator locations

I have a clicking noise coming from my dash and the heat on the passenger side doesnt blow as hot as the driver side. I have removed the console and found four of the five actuators. Two behind the climate controls, one behind glove box and one on the recurt. i have removed these listed and...

www.ramforum.com

Only trucks with the dual zone ATC will have the actuator behind the HVAC box.