vitti821
Junior Member
I bought a flood 2018 2500 laramie longhorn truck (this is how i do things) and i have replaced a couple computers on the floor nothing too crazy.
BUT my tranny is giving me some issues. Truck is deleted and tuned and I get a low line pressure code as well as the truck neutrals out sometimes when shifting from 4/5/6 back into 1 but if you turn the truck off and back on its fine until it happens again. Also the truck shifts fine if you use the manual shift option on the gear selector.
Had the truck brought to a transmission shop and he tested line pressure and other things and said he thinks the tranny should be working.
I had replaced the TCM at the passenger kick board area. Does that need to be programmed by dodge? or does anyone have any other recomendations?
(everything else in the truck is working as it should)
BUT my tranny is giving me some issues. Truck is deleted and tuned and I get a low line pressure code as well as the truck neutrals out sometimes when shifting from 4/5/6 back into 1 but if you turn the truck off and back on its fine until it happens again. Also the truck shifts fine if you use the manual shift option on the gear selector.
Had the truck brought to a transmission shop and he tested line pressure and other things and said he thinks the tranny should be working.
I had replaced the TCM at the passenger kick board area. Does that need to be programmed by dodge? or does anyone have any other recomendations?
(everything else in the truck is working as it should)