ABS... 2-wheel or 4-wheel

[THRobinson]

Getting ready to buy some parts for the truck... rotors, pads, lower ball joints I know are bad and sounds like the wheel bearing as well now.

Was looking online to get some parts and for the wheel bearing and hub assembly it asks is 2-wheel ABS or 4-wheel.

Easy way to tell what I have?

I have a 2003 Dodge Ram 1500, 4x4 crew cab with the 5.7l Hemi (Canada).

Had a dealer look in the Fall, which is how I know the balljoints are shot. Need to buy a new jack though because my old one isn't big enough for the truck. So, right now, can't jack it up. I can hear the bearings though which is why pretty certain the driver's side needs replaced, but I always tend to pay the extra and buy both sides at the same time.

 

[Bloody_Knuckles]

I would look for wiring for an ABS sensor on the rear.

 

[HemiLonestar]

I would look for wiring for an ABS sensor on the rear.

There will always be one, even of it's just two wheel ABS it's the rear wheels. It's the fronts that matter. Easiest way? Go here, enter your VIN, it will tell if the truck was built with 2 or 4 wheel: https://fcacommunity.force.com/RAM/s/equipment-listing