danny
Member
- Joined
- Nov 28, 2012
- Posts
- 91
- Reaction score
- 3
- Location
- Mount Pleasant S.C
- Ram Year
- 2019 Classic
- Engine
- 5.7
Has anyone installed aftermarket power door locks in a Tradesman? If so what did you use and how difficult was it?
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Yes front door. I don't have pictures but it's straight forward. I also have a regular cabThanks for replying. Where and how did you mount the actuators? Just the front doors, I have a regular cab.
Hardest part is fishing the cables thru the door harness openingsThanks for replying. Where and how did you mount the actuators? Just the front doors, I have a regular cab.
Looking at it I figured it would be a pain running the wires. Did you mount the actuators between the door panel and the inner plastic panel are between the inner plastic panel and the window? I'm trying to figure out the placement of the actuators.Hardest part is fishing the cables thru the door harness openings